How Much Does Siding Replacement Cost in Raleigh? [2025 Data]
Expect to pay between $5,424 and $14,888 to replace siding in Raleigh, North Carolina. The size and style of your home, as well as the type of siding you choose, will all impact how much you spend on new siding.
The average cost to replace siding in Raleigh is $9,822.
Home size has the biggest impact on siding costs in Raleigh.
The median home size in Raleigh is 2,170 square feet.
Siding materials also influence costs; vinyl, wood, brick, and fiber cement are common in NC.
You don’t need a siding permit in Raleigh, but materials and labor are subject to sales tax.
The average cost to replace siding in Raleigh, North Carolina, is $9,882, but prices often range between $5,424 and $14,888. In extreme cases, prices can be higher or lower — like if you’re only residing a small portion of your home (lower) or you’re installing brick siding on a massive house (higher). Size, material, and labor are the biggest cost factors impacting price.
Siding Replacement Cost Factors
Several factors influence how much it costs to replace siding in Raleigh, North Carolina, including the size of your home, the siding material you purchase, and the unique shape and style. Labor also influences the overall cost.
Home Size
The size of your home has a large impact on the cost of siding replacement in Raleigh. Why? Generally speaking, the more square footage in your home, the more exterior surfaces there are to side.
While it’s not a direct ratio—additional square footage for partially or fully underground portions of your home doesn’t correlate to more siding, and the height of each level can impact the amount of siding without an impact on square footage—it is a decent measure for estimating siding costs.
In Raleigh, the median square footage for a residential property is 2,170, per the Federal Reserve Bank of St. Louis. Installing siding on a 2,000-square-foot home could cost as little as $2,000 with vinyl siding or as much as $100,000 with brick or stone siding.
The table below shows the typical cost ranges for siding installation, based on the size of your home.
| House Size (Sq. Ft.) | Average Cost for Siding (Vinyl, Wood, Aluminum, Fiber, or Cement) | Average Cost for Brick or Stone Siding |
|---|---|---|
| 1,000 | $1,000–$13,500 | $9,000–$50,000 |
| 1,500 | $1,500–$20,250 | $13,500–$75,000 |
| 2,000 | $2,000–$27,000 | $18,000–$100,000 |
| 2,500 | $2,500–$33,750 | $22,500–$125,000 |
| 3,000 | $3,000–$40,500 | $27,000–$150,000 |
Materials
The type of siding you choose can also impact its overall cost, from as little as $1 per square foot for wood to as much as $30 per square foot for stone. In Raleigh, you need to consider the temperate climate, with high humidity and moderately warm springs and falls, hot summers, and harsh sunlight, when choosing your siding material.
Affordability and low maintenance are among the biggest pros of vinyl siding in Raleigh, and lighter vinyl colors can reflect the sunlight. If you’re worried about keeping your home cool during hot North Carolina summers, consider insulated vinyl siding.
Other popular siding material choices include fiber cement (highly durable for high winds that occasionally reach Raleigh during hurricane season) and wood siding (a charming aesthetic found on some historic North Carolina homes).
You’ll also find plenty of brick and brick veneer homes; for some time following World War II, North Carolina was the leading brick-producing state in the U.S., and as of 2004, it was still responsible for 10% of the country’s brick production.
The table below breaks down the typical cost per square foot for various siding materials, as well as how long you can expect that siding to last.
| Siding Material | Cost Per Sq. Ft. | Lifespan |
|---|---|---|
| Engineered wood | $1–$6 | 20–40 years |
| Wood | $1–$15 | 20–40 years |
| Aluminum | $3–$6 | 20–40 years |
| Brick veneer | $3–$10 | 70-100 years |
| Vinyl | $3–$12 | 20–40 years |
| Steel | $4–$16 | 50 years |
| Stone veneer | $5–$11 | 20–75 years |
| Fiber cement | $5–$14 | 50 years |
| Stucco | $7–$9 | 50+ years |
| Stone | $7–$30 | 100+ years |
| Brick | $10–$20 | 100+ years |
Home Style and Shape
Raleigh offers a nice mixture of older home styles, such as Colonial, Victorian, and Craftsman, and more modern aesthetics, as well as ranches and midcentury-mod homes. The style of your home can influence how much siding you need—and the type of siding material required. Some styles have more unique shapes that complicate installation, which can also influence the cost of siding replacement.
Victorian-style homes, for instance, tend to be larger and have more angles, which can make siding installation more complicated and more expensive. A ranch house, in comparison, is more affordable, due to its smaller size and standard shape.
Old Siding Removal
In some cases, siding pros may simply install new siding over the existing siding, in which case you don’t need to budget for siding removal. However, if the siding is aging and there’s a chance of pests or rot, you should probably pay to have the siding removed, which can add to the overall labor costs.
Plus, you’ll likely need to pay the siding pro you hire to dispose of the debris. On average, the cost of junk removal runs between $125 and $375.
Siding Pro Costs
Labor is a big part of siding replacement costs—and unless you’re a highly experienced DIYer, this is a massive job you’ll want to leave to a siding contractor in Raleigh. Here are some costs to bear in mind.
Labor Rates
In general, siding contractors charge between $1 and $4 per square foot for siding installation; siding removal, if warranted, would be on the low end of that range. Contractors who bill hourly typically charge between $40 and $75 per hour for siding jobs in Raleigh.
Permits
Wake County does not require construction permits for exterior siding replacement on residential structures, so you don’t have to factor the cost of a building permit (roughly $150) into your budget.
That said, if you live in a Raleigh historic district, you’ll need to follow strict guidelines when replacing your siding, which can add to the cost.
Taxes
In North Carolina, both the materials and labor related to siding installation are subject to sales tax, which will influence the price. The minimum combined sales tax (state, county, and city) in Raleigh is 7.25%.
Though this is a simplification, a project priced at the average Raleigh siding replacement cost of $9,882 would incur roughly $716 in sales tax.
Does New Siding Increase Home Value?
New siding can certainly increase your home’s value, but not likely by the amount you spend to have the siding installed. For instance, if you spend $10,000 to have new siding installed, you shouldn’t expect your house to be appraised for $10,000 more than it would otherwise.
However, if your home’s siding is in rough shape, it’s likely to deter potential buyers who would otherwise be interested in purchasing your house. And if a homebuyer sees that you’ve just replaced the siding, they may be more incentivized to make an offer—that’s one cost they won’t have to budget for over the next couple of decades, in theory.
How Angi Gets Its Cost Data
Home is the most important place on earth, which is why Angi has helped more than 150 million homeowners transform their houses into homes they adore. To help homeowners with their next project, Angi provides readers with the most accurate cost data and upholds strict editorial standards. We survey real Angi customers about their project costs to develop the pricing data you see, so you can make the best decisions for you and your home. We pair this data with research from reputable sources, including the U.S. Bureau of Labor Statistics, academic journals, market studies, and interviews with industry experts—all to ensure our prices reflect real-world projects.
Want to help us improve our cost data? Send us a recent project quote to [email protected]. Quotes and personal information will not be shared publicly.
Get our Angi-powered app
