Get matched with top roofers in Natrona County, WY

Properly installed chimney flashing can last anywhere from 15 to 50 years. However, flashing generally only needs to be replaced when it is damaged, corroded, or no longer creates a watertight seal. Several factors influence its longevity, including the material type, quality of installation, and local climate. For example, copper flashing tends to last longer than galvanized steel. Large storms and extreme weather can also damage flashing, potentially requiring earlier replacement. To ensure its longevity, it is recommended to have your chimney and roof inspected annually. A professional can assess the flashing's condition and recommend any necessary repairs.

Metal roofs have a bad reputation for being loud, even if that's not necessarily true—it's usually only thin tin or sheet metal roofs that are loud during storms. Stone coating adds a layer to the metal that severely cuts down on any noise from rain. In many ways, stone-coated steel roofs are quieter than your average, run-of-the-mill asphalt shingle roof.

The proper specifications for furring strips can vary, so you should always consult the roofing manufacturer's guidelines or your roofer. However, general recommendations are as follows:

• Thickness: Furring strips are typically 1 to 1-1/2 inches thick, meaning standard 1-by or 2-by lumber works well. In areas with extreme winds, a thinner strip may be preferred to limit how much air can get under the roof and cause uplift. A thicker strip can add slightly more insulation but will also increase installation costs.

• Spacing: The recommended spacing for furring strips is between 12 and 24 inches apart on center. Proper spacing is crucial for ensuring good airflow, adequate drainage, noise reduction, and better energy efficiency. The ideal spacing can depend on the roof's pitch and the specific type of metal roofing being installed.

Ridge vents can last as long as your roof does. As long as your ridge vents were installed correctly by a qualified professional, they will need very little upkeep. Inspecting your ridge vents annually to ensure they aren’t cracked, clogged, or leaking will help prolong their lifespan.