Get matched with top garbage collectors in Gillette, WY

If your garbage disposal powers up and you can hear it hum, but the arms inside aren’t moving, the problem might be a stubborn clog, a build-up of grease, or a jam of the impeller plate. To troubleshoot these, ensure your unit is off and disconnected from its power source before checking inside the drain or attempting to manually rotate the impeller arms or plate from the underside of the unit. A hex wrench can help.

While the part of the garbage disposal that attaches to the sink is universal, not every single disposal will work in every sink cabinet. A larger disposal may be too big to fit in a compact space, for example. If the pipes under your sink are arranged in an unusual way, it may be difficult to put in a bigger disposal, even if there technically is enough space.

While unplugging your garbage disposal and plugging it back in may help, most units have an actual reset button, a bright red switch found on the underside of your unit. If your garbage disposal needs resetting, you may notice this button sticking out about a quarter of an inch from the surface of the unit, with which it’s usually flush. Simply depress this reset button to reset the unit, and then test to ensure it’s working about 10 minutes later.

Whether you choose to repair your garbage disposal will depend on the problem. For minor issues like a bad seal, you can fix the unit for less than $10. If the motor unit is broken, which can easily cost $150, you may want to consider replacing the entire disposal if it’s getting on in years.