Get matched with top asphalt driveway pros in Lesage, WV

Asphalt and concrete have their pros and cons, but it really depends on your priorities. If you’re looking for durability, concrete’s your best bet, lasting up to 50 years with minimal upkeep. Asphalt, on the other hand, needs more TLC with regular resealing but is cheaper to install and easier to repair. Concrete also wins in curb appeal and resale value, offering homeowners more customization. But if you’re looking for quicker, more affordable installation, asphalt has the advantage. Ultimately, your decision should align with your budget, willingness for maintenance, and design preferences.

In most cases, you don’t need a permit to repave your driveway, although some exceptions exist. If you’re widening your driveway and plan on widening the apron as well, you’ll usually need a permit from the Department of Transportation in your area. This permit costs between $50 and $300 in most cases. Most municipalities will also require a certified and insured contractor do the work relating to the apron and curb cut. You can contact your building department or ask your paving company if you need a permit. Your driveway professional will usually pull the permit for you.

Driveways should be sloped with a minimum 2% slope—anything lower will cause precipitation and runoff to collect. A 2% slope is the equivalent of a 2-foot rise over 100 feet. One quick way to check the integrity of your driveway’s slope: no more than four inches of water should collect on the surface longer than 15 minutes after rain.

The average cost of 1,500 square feet of asphalt ranges from about $10,500 to $22,500, depending on location, thickness, base material, and how accessible the job site is to crews and equipment. Keep in mind that your asphalt material cost may vary depending on its type, ranging from porous asphalt to heated blacktop. Standard asphalt costs $7 to $13 per square foot.