Get matched with top epoxy flooring pros in Bradley, WV

The relative cost of adding an epoxy coating to your garage varies compared to other flooring materials and the type of epoxy. For example, epoxy can cost between $3 to $12 per square foot to install, which typically costs more than other garage flooring options, such as concrete sealers, vinyl, and concrete stain. In comparison, vinyl SPC flooring for garages cost between $3.50 to $8 per square foot and concrete sealer costs $50 to $420, depending on the type of sealant.

Yes. So-called “floating” cork floors can be installed over concrete subfloor, though a polyethylene vapor barrier is required. This type of installation is achieved using the glue-down tiles, which are trickier for a DIY approach, so consider calling a professional to help you if you’re planning to install your cork floor over concrete. 

The toilet flange anchors to the subfloor, usually with wood screws or cement screws, but most of it should sit above floor level at full height. When a flange is flush with the subfloor or below it, it can lead to the creation of leak paths.

There are a few different types of finishes to choose from for the final step of the project. 

Water-based polyurethane sealants emit fewer odors and fumes but dry quickly, which can pose a challenge when trying to get a smooth coat. Oil-based polyurethane sealants let out more odors and fumes into the air (it’s especially important to wear a respirator if you choose this type), but they take longer to dry, which can be more forgiving during the finishing step. 

Some may prefer wood oil to polyurethane because rather than creating a layer, it becomes part of the wood. Wood oil takes longer to dry, and is less resistant to wear and tear; however, it creates a natural-looking result by enhancing the grain of the wood.