Best above ground pool installation pros near Vesper, WI

Yes, it’s possible to put too much salt in your saltwater pool, and doing so can cause a number of problems, including corroding metal parts and causing the chlorinator to stop working correctly. In general, slightly elevated salt levels won’t cause serious problems beyond salty-tasting water, but you should dilute the water in a pool with extremely high salt levels to prevent damage to its components.

No, shock and chlorine are not the same thing, though they are related and both are used for pool maintenance. Regular chlorine, often in the form of tablets, is a sanitizer used for routine, day-to-day maintenance to keep a steady chlorine level. Pool shock, however, is a highly concentrated dose of chlorine used periodically for a more intense cleaning. It rapidly raises chlorine levels to fix issues like cloudy water or algae growth and also eliminates chloramines, which are byproducts of regular chlorination. Because their purposes and concentrations differ, they are not interchangeable, and proper pool care typically requires using both.

Hire a licensed pool contractor in your area with ample experience in your particular pool design. Pool contractors will walk you through both the design and installation process. They will also recommend or hire a team of subcontractors to manage clearing the land, excavating for the pool, and adding all the design and electrical touches that make your pool run smoothly.

You don’t need to drain the whole pool to patch a pool liner, but be prepared to dive in with your swimsuit and goggles to patch a leak below the water level. By draining the pool, you can actually expose the liner to more harsh conditions, like wind and sunlight, that cause the tears to worsen. It’s best to use the ink test and waterproof patches or tape to identify the leak and patch it up.