Top-rated deck maintenance specialists.

Get matched with top deck maintenance specialists in Trego, WI

Enter your zip and get matched with up to 5 pros

Need a pro for your deck maintenance project in Trego, WI?

Select your specific project to find the pro for you.

Find Deck maintenance specialists in Trego

Hover Logging and Tree Services
4.3(
15
)
Deck, Fence, Patio or Porch - Clean and SealDeck, Fence, Patio or Porch - Clean and Seal - For Business

Serving Trego, WI and surrounding areas

Approved

In business since 2016

Free estimates

Small jobs welcome

"I needed to have many trees trimmed (huge white pines with huge branches) to get a well drilling truck along the house as well as drop several standing dead trees. He did a great job. Did a great clean up afterwards and I am waiting for him to come back for some more tree work. I highly recommend Chris Hove Logging & Tree Services!"
Roofing job
Roofing job
Roofing job
Response time2 days
1 neighbors recently requested a quote
Recommended by78%of homeowners
Showing 1-10 of 25
Deck Maintenance questions, answered by experts

Yes, you can draw your own deck plans in many cases. However, you must know your local building codes and be familiar with carpentry principles. Even then, it's always best to run your plans by a professional contractor with experience building decks, whether you choose to DIY some of the build or not.

Yes, deck footings typically require an inspection before laying down concrete. While not all local building codes require footing inspection, proper placement ensures a safe and structurally sound deck. An inspector will verify that the deck can adequately hold what you put on top of it., and that the footings have been dug to the correct dimensions.

Building a deck without a permit could lead to fines for both the homeowner and the contractor. The exact penalties will depend on your state and municipal building laws. You might also be required to remove the deck and apply for a permit before you can build another. While it might be tempting to skip the permit to save a few bucks, it’ll cost you much more if you’re caught.

Building codes for deck railings can vary by location, so it's important to consult your local regulations before construction. Generally, a guardrail is required for any deck that is more than 30 inches above the ground.

For residential properties, the standard minimum height for a deck railing is 36 inches. However, some states and municipalities have stricter requirements; for example, California and Washington mandate railings that are at least 42 inches high. Therefore, a 42-inch railing is not considered too high and may be required in your area or chosen voluntarily for additional safety.

In addition to height requirements, codes also specify other safety features, such as the maximum spacing between balusters to ensure they are close enough to prevent a child from squeezing through.

There are approximately 5.33 board feet in a 2x4. You can use the board foot calculator in this article to easily find the answer. A 2x4 is 2 inches of thickness by 4 inches of width, so you need to find the length, with 8 feet being the most common. You’d use the calculator here to multiply 2 times 4 times 8, and then divide by 12, arriving at a total of 5.33 board feet. 

The Trego, WI homeowners’ guide to deck maintenance services

From average costs to expert advice, get all the answers you need to get your job done.