Get matched with top percolation testing pros in South Wayne, WI

There are products that still contain asbestos, but they were typically installed decades ago. Common places where you may still find asbestos-containing materials are in siding, wrapped around ductwork, in older appliances (i.e., stove and gravity furnaces), and in floors. Asbestos was primarily used as an insulator, so anywhere in an older home where you lose heat is where you will most likely find asbestos.

Depending on the size of your home, the inspection process could take a few hours or a few days. While inspecting your home, the asbestos specialist will take small sections of the potentially contaminated material. They will then send the sample to an accredited laboratory or the local health department for testing. 

The cost of asbestos testing depends on your location, the home's size, and the testing area's complexity. Plan to spend between $230 and $800 for testing. During testing and while handling potential asbestos, the specialist may wear protective gear, including gloves, overalls, appropriate footwear, and respiratory equipment.

It is strongly advised not to touch or disturb asbestos-containing materials unless necessary. Asbestos fibers can be released into the air when the material is damaged or disturbed, posing serious health risks if inhaled. It is best to leave any handling of asbestos to trained professionals who can remove the asbestos safely.

Asbestos testing takes place in two stages—collection and lab testing. Collection can take less than 20 minutes if a professional manages to get a direct sample. If air samples are required, then the pro will set up a testing device and return to collect it. In both cases, the sample is sent to a lab and results are confirmed or denied usually within one to two days.