Top-rated ceramic tile pros.

Get matched with top ceramic tile pros in Marinette, WI

Enter your zip and get matched with up to 5 pros

Need a pro for your ceramic tile service project in Marinette, WI?

Select your specific project to find the pro for you.

Find Ceramic tile pros in Marinette

Avatar for Nicholas Palm Tile and Stone
Nicholas Palm Tile and Stone
4.8(
4
)
Tile: Ceramic and Porcelain - InstallTile: Ceramic and Porcelain - Install - For BusinessTile: Ceramic and Porcelain - Repair+1 more

Serving Marinette, WI and surrounding areas

In business since 2003

Free estimates

Credit card accepted

"It was great i was told by nick he would be at my place at 12 pm and he actually was 15 min earlies he set up my whole garage to work on cars exactly how i wanted and imagined he even built my work bench so it collapses into the wall like i wanted and put outlets in it as well he was reasonably priced and didnt rape me with labor i am having him come back this spring to redo my deck as well he was professionable and knowledgeable"
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+1

Recommended by100%of homeowners
Showing 1-10 of 15
Ceramic Tile questions, answered by experts

For professional labor and materials, it would cost between $6,000 and $28,000 to install 1,000 square feet of Saltillo tile flooring. If that’s out of your budget, you could consider laying the tiles yourself or choosing a less expensive type of flooring. For example, vinyl flooring costs just $2 to $7 per square foot, so for a 1,000-square-foot space, you’d pay $2,000 to $7,000.

You can put hot pans on porcelain countertops. Porcelain is highly resistant to heat—it’s manufactured at around 2,500 degrees Fahrenheit, so it can withstand a ton of heat without cracking or damaging. Even though the high heat is a plus, you should still be cautious when putting hot surfaces on porcelain countertops.

The underlayment determines a ceramic tile’s sturdiness, and a cement board or backer board works best. Be sure to tape the joints when using these materials, and consider laying it on top of a layer of thin-set for more stability.

If the hearth ends against a wall, you can use a tile cutter as you normally would. However, if the edge of your hearth ends with no surface pressing against it,you may want to look into rounded tiles. These give a smooth edge to your hearth and make sure cut edges aren’t visible. You can also see if the tile you have has pieces that have been glazed or rounded on one edge. You’d then cut the tile and place it normally, with the cut edge facing inward. 

Like glass tiles, you will not need to seal most porcelain tiles, particularly if the porcelain is already glazed. It depends on quality. Porcelain is very water resistant, but it is not 100% waterproof. To avoid staining, some homeowners use a penetrating sealer. It is also a good idea to seal your grout. Unless you use epoxy grout, grout is very porous and can harbor bacteria, mold, and mildew.

The Marinette, WI homeowners’ guide to ceramic tile services

From average costs to expert advice, get all the answers you need to get your job done.