Get matched with top sump pump installation pros in Holmen, WI

To test for toilet leaks, use water coloring in the water tank and see if the water slips into the bowl from the tank. This test will indicate if there’s a problem with the flapper or refill tube. You can also put water coloring in the bowl of the toilet to see if there is a leak there. If there is, you should see the colored water on the outside of the toilet bowl or on the floor. 

A sewage ejector pump is necessary if you have any plumbing fixtures, such as a bathroom, laundry room, or sink, located below the level of your home's main sewer line. Standard plumbing relies on gravity to drain wastewater and solid waste into the municipal sewer system or a septic tank. For fixtures below this level, like those in a basement, gravity cannot move the waste upward. The ejector pump provides the force needed to pump the sewage up to the main line. Without one, wastewater from below-ground fixtures would back up, potentially causing a sewage overflow and flooding. If all of your plumbing is on the main floor or higher, gravity is sufficient and an ejector pump is not needed.

You should be fine. Most high-grade grinder pumps have a 24-hour holding capacity within the tank. You can continue to use the facilities so long as the power outage does not stretch into days. In a worst-case scenario, attach a generator to the grinder pump, providing it has sufficient electric capacity.

Common problems include motor failure, clogged discharge lines, and float switch malfunctions. Regular maintenance prevents many issues.