Top-rated sewer cleaners.

Get matched with top sewer cleaners in Holcombe, WI

Enter your zip and get matched with up to 5 pros

Need a pro for your sewer cleaning project in Holcombe, WI?

Select your specific project to find the pro for you.

Find Sewer cleaners in Holcombe

Sewer Cleaning questions, answered by experts

No, you typically cannot use metal detectors to find your sewer line. Most sewer lines are made of non-metallic materials such as PVC, clay, or cast iron, which are not detectable by standard metal detectors. Metal detectors are designed to locate metallic objects, so they won't be effective for identifying the path of a non-metallic sewer line. To locate your sewer line accurately, it's best to use other methods.

While some chemical drain cleaners with hydrochloric acid can dissolve hair, this method is not recommended as it can also destroy your plumbing pipes. A common DIY alternative is using baking soda and vinegar, which can help break down the clog but will not actually dissolve the hair. The best and safest method for clearing a hair clog is to remove it manually. You can use a drain snake, a straightened wire hanger with pliers to fish out the clog, or have a plumber use a professional auger for more severe blockages.

Sewer gas in any location can cause eye and respiratory irritation if you’re exposed at low levels, or more severe symptoms if you’re exposed at high levels—but fortunately, the fresh air outside means it’s less likely to affect your physical health. However, sewer smells outside can still indicate significant plumbing problems that will need to be dealt with, such as a potentially damaged sewer line or roof vent pipe.

Outdoor plumbing issues are no less serious or urgent to fix than interior plumbing problems. These problems may require excavation and lawn repair due to the plumbing often being buried underground. The most common outside plumbing problems include:

  • Clogged landscape drainage: $200–$1,000

  • Clogged sewer lines: $60–$250 per linear foot

  • Corroded or rusted pipes: $1,500–$15,000+

  • Leaking drain lines: $200–$1,000

  • Leaking water mains: $300–$4,000+

  • Septic system failure: $600–$3,000+

  • Tree roots in pipes: $200–$1,000

  • Well pump failure: $350–$1,500

The cost to clean a sewer line is about $370, ranging from about $190 to $550 on average. The specific cleaning method and the problem's severity will impact the project's overall cost. Some of the most common sewer line cleaning methods include:

  • Snaking or rodding: $100–$250

  • Hydrojetting: $350–$600

  • Chemical treatments: $600–$1,000

  • Repair or replacement: $1,000–$7,500

The Holcombe, WI homeowners’ guide to sewer cleaning services

From average costs to expert advice, get all the answers you need to get your job done.