Get matched with top sewer cleaners in Cameron, WI

The cost to unclog a drain varies based on the location and severity of the clog. For simple clogs within your home, such as in a sink, toilet, or shower, hiring a plumber typically costs between $110 and $350, with an average of around $200. Snaking a toilet or sink usually costs between $110 and $275, while a bathtub or shower clog costs about $225.

For a more serious clog in the main sewer line, the cost is higher. Clearing a main line clog generally costs between $200 and $600, with an average of about $380. However, prices can range from as low as $100 for snaking a minor clog to over $1,600, particularly if advanced methods like video inspection and hydrojetting are needed for a large or hard-to-reach blockage. Some severe main line clogs can cost upwards of $1,000 to clear depending on factors like the cause of the clog, its distance from an accessible cleanout, and whether the pipe is located beneath an occupied space (e.g., in an apartment building). You may be able to save money on minor clogs by using a drain snake or bladder yourself.

Regardless of the drain cleaner type you choose to use, they all work through chemical reactions that create heat. Thanks to the heat, the clogged hair begins to dissolve until it is able to be flushed away. To avoid clogs in your drain due to hair, use hair catchers and empty them out after every shower.

While some chemical drain cleaners with hydrochloric acid can dissolve hair, this method is not recommended as it can also destroy your plumbing pipes. A common DIY alternative is using baking soda and vinegar, which can help break down the clog but will not actually dissolve the hair. The best and safest method for clearing a hair clog is to remove it manually. You can use a drain snake, a straightened wire hanger with pliers to fish out the clog, or have a plumber use a professional auger for more severe blockages.

Some of the most common plumbing problems in mobile homes are frozen pipes, leaking pipes, clogged drains, and low pressure. Since the pipes in a mobile home aren’t as insulated as those in a standard build, they’re more susceptible to fluctuating temperatures and damage.