Best egress window pros near Genoa, WI

Egress windows are typically required for basements with habitable space or living quarters. Not all basements or lower levels require egress windows. However, egress windows are required in homes with living spaces such as bedrooms and living rooms in a basement. The International Residential Code and International Building Code require sleeping rooms to have a specific size egress window. Check your local building codes to confirm the requirements in your area.

You install a window well 8 to 12 inches deeper than the base of the window sill. After filling the well with drainage rock, the well should sit 3 inches below the bottom of the window. The top of the window well should also be at least 3 inches higher than the surface-grade ground. The window well should be about 6 inches wider than the window opening.

Most modern egress windows installed in basements open outward into a window well, although some older homes have in-swing windows. Egress windows, like casement windows used in other parts of the home, such as bedrooms and bathrooms, may open inward, and these windows are often larger than outward-opening windows.

Yes, you can install a bay window in an existing house. You’ll need to have a structural engineer draw up plans to add the necessary support to your exterior load-bearing walls and a general contractor to make the changes to the framing around the new wall opening. This will cost an average of $3,000. After that work is done, a window installer can set the new bay window in place.