Get matched with top structural engineers in Evansville, WI

Q: Is a structural engineer’s report worth it?

• <div><p>A structural engineer&rsquo;s report is almost always worth it, as it can help you avoid buying or overpaying for a home with structural issues. The most important thing the report does for you is provide peace of mind that you won&rsquo;t have to pay thousands of dollars for structural repairs right after closing on a property. </p></div>

Q: What does a structural engineer's report include?

• <div><p>A structural engineer's report provides a professional assessment of a property's structural condition. It typically includes an evaluation of the foundation, key structural elements like roof trusses, floor joists, studs, beams, and rafters. The report will also contain a detailed description of the engineer's findings, often supported by photographs, and provide recommendations to correct any identified issues. Depending on the scope of the inspection, it might also include an assessment of property drainage, potential issues from environmental conditions like extreme weather or tree placement, and an estimated time and cost for any recommended repairs.</p></div>

Q: Why are studs 16 inches apart?

• <div><p>In framing, studs are placed at 16-inch intervals to coincide with the typical spacing of wall materials such as drywall or plywood. This spacing is called &quot;on-center&quot; and is necessary for maintaining structural stability and efficient use of materials. The 16-inch spacing also helps to distribute the weight evenly across the building's structure. For those looking to cut material costs and improve energy efficiency, 24-inch stud spacing can be employed through a method called &quot;advanced framing&quot;. This requires careful planning and adherence to local building codes to ensure structural integrity. </p></div>

Q: What building codes apply to spiral staircases?

• <div><p>Building codes for spiral staircases will vary by your location. Most local codes will specify minimum tread width, riser height, handrail requirements, and headroom. These standards help ensure safety and accessibility for all users. Always check local codes before you begin the installation to ensure compliance and avoid costly modifications or fines.</p></div>

Q: How much does a structural engineer cost?

• <div><p>The average cost to hire a structural engineer is about $550, with prices generally ranging from $200 to $1,500. Structural engineers may charge a flat rate, by the project, by square footage, or an hourly rate, which is typically between $100 and $250. Many jobs, such as inspections and structural calculations, are billed at a flat rate, which often falls between $300 and $800. The final cost depends on several factors, including the project's type, scope, size, complexity, ease of access for inspection, and your geographic location.</p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your structural engineering project in Evansville, WI?

Select your specific project to find the pro for you.

Verified Reviews for Structural Engineering pros in Evansville, WI

*The Angi rating for Structural Engineering companies in Evansville, WI is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Structural Engineering needs.

*The HomeAdvisor rating for Structural Engineering companies in Evansville, WI is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Structural Engineering needs.

Last update on March 13, 2023

Reviewed in March 2023
I had a great, convenient experience. He came prepared for anything. Had all the tools & even the PVC piping needed, so I didn't have to schedule extra apts. very efficient & mindful of my price range. Also did some random repairs, added a bracket to the basement railing to...
CK Home Improvements, LLC
Request a quote
Reviewed in December 2022
Hands down the best contractor I've worked with, the craftsmanship was phenomenal
Graceful LLC
Request a quote
Reviewed in July 2022
Work was done on schedule and very professionally. Filled the gap in project scale between DIY and commercial construction very well, with old-school craftsmanship and great work ethics.
Illyrian Group
Request a quote
Reviewed in November 2021
They did an excellent job the opening to the crawl space had to expanded to allow entry of a man, and Saunders was able to do this. They installed a bathroom fan , so that the fan could be vented to the outdoors instead of into the Attic. Saunders personnel were able to tell me what they saw...
Saunders Insulation Specialists
Request a quote
Reviewed in July 2021
My first experience with Ace was many years ago when the wind blew some shingles loose from my roof. Ace was the first to respond, fixed the loose ones as well as some others they found that I didn't even notice. I asked what I owed, they said nothing. Just keep us in mind when you need a roof....
Ace Exterior Solutions, LLC
Request a quote
Reviewed in November 2015
Terry and his crew did an excellent job with our addition. He was willing to do just what we wanted, and had some creative ideas to make the project fit our budget and time frame. His crew were experienced veterans who paid attention to detail and built a solid structure that will last for a...
Budget Home Improvement Inc
Request a quote
Reviewed in December 2014
Given the historic nature of our new home (1848...pre-civil war), we wanted someone with experience with historic structures. Knowing that he spent several years working in historic Mineral Point as well as at the state level for Wisconsin Main Street, we knew he was the perfect choice. Not only...
Accredited Home Inspection Services LLC
Request a quote
Reviewed in June 2014
Prompt. Came on time for measurements and estimate. Work was completed the following week by two workers. No fuss. Sturdy structure. Great. <br />
HLW BUILDERS LLC
Request a quote
Reviewed in April 2013
Rebuilding the rock wall went well. They built the wall far better than the previous wall, with larger rocks and landscaping fabric behind it. Took care of the drainage problems too. For the rock structure we had wanted a more organic look with rocks of varying sizes but Greg was more concerned...
Complete Lawn & Garden Service
Request a quote
Reviewed in May 2012
I was pleased with the service. There were a couple of follow up requests that I had. He was very thorough about coming back and making it right. He's flexible. He's unique in his ability to work and rectify old structures and bring them under new compliances. He has a crew that's very...
Harrison Home Improvement
Request a quote

Find Structural engineers in Evansville

Copperhead Contracting

3.7(

)

Serving Evansville, WI and surrounding areas

In business since 2012

"We hired Copperhead Contracting to help us remodel our kitchen and bathroom along with replacing our roof. The whole team was very knowledgeable and helpful from start to finish. They provided us with a wide variety of samples and gave us all the available options to make our bathroom and kitchen work for us! They made sure to show up on time everyday there and stayed in contact with us throughout the process. We will be using Copperhead Contracting for all our future restoration needs and reccomend them to all our friends and family!"

Recommended by75%of homeowners

Request Quote

Fauerbach Surveying & Engineering

New to Angi

Serving Evansville, WI and surrounding areas

In business since 1994

Fauerbach Surveying & Engineering is a client-focused company that strives to ensure the highest level of customer satisfaction.

Request Quote

Structural Engineering questions, answered by experts

A structural engineer’s report is almost always worth it, as it can help you avoid buying or overpaying for a home with structural issues. The most important thing the report does for you is provide peace of mind that you won’t have to pay thousands of dollars for structural repairs right after closing on a property.

A structural engineer's report provides a professional assessment of a property's structural condition. It typically includes an evaluation of the foundation, key structural elements like roof trusses, floor joists, studs, beams, and rafters. The report will also contain a detailed description of the engineer's findings, often supported by photographs, and provide recommendations to correct any identified issues. Depending on the scope of the inspection, it might also include an assessment of property drainage, potential issues from environmental conditions like extreme weather or tree placement, and an estimated time and cost for any recommended repairs.

In framing, studs are placed at 16-inch intervals to coincide with the typical spacing of wall materials such as drywall or plywood. This spacing is called "on-center" and is necessary for maintaining structural stability and efficient use of materials. The 16-inch spacing also helps to distribute the weight evenly across the building's structure. For those looking to cut material costs and improve energy efficiency, 24-inch stud spacing can be employed through a method called "advanced framing". This requires careful planning and adherence to local building codes to ensure structural integrity.

Building codes for spiral staircases will vary by your location. Most local codes will specify minimum tread width, riser height, handrail requirements, and headroom. These standards help ensure safety and accessibility for all users. Always check local codes before you begin the installation to ensure compliance and avoid costly modifications or fines.

The average cost to hire a structural engineer is about $550, with prices generally ranging from $200 to $1,500. Structural engineers may charge a flat rate, by the project, by square footage, or an hourly rate, which is typically between $100 and $250. Many jobs, such as inspections and structural calculations, are billed at a flat rate, which often falls between $300 and $800. The final cost depends on several factors, including the project's type, scope, size, complexity, ease of access for inspection, and your geographic location.

The Evansville, WI homeowners’ guide to structural engineering services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Timothy Moore
•
May 30, 2026May 30, 2026
How Much Does It Cost to Install an LVL Beam? [2026 Data]
Looking to remove load-bearing walls and vertical supports to open up your living space? Learn about what affects the cost to install an LVL beam.
Dan Simms
•
May 30, 2026May 30, 2026
How Much Does a Structural Engineer Cost to Hire? [2026 Data]
The cost of a structural engineer is easily justifiable given the value they bring to the table. Use this guide to see what hiring your professional will total.
Lyle Hendriks
•
May 5, 2026May 5, 2026
How Much Does Beam Installation Cost [2026 Data]
Beam installation costs are an important consideration if you’re building a home or doing renovations. Learn about average costs and factors in this guide.
Kyle Schurman
•
Mar 19, 2026Mar 19, 2026
Who to Hire to Replace a Sill Plate?
A sill plate needs to be replaced when it starts to rot out. Use this guide to help you know who to hire to replace a sill plate at your home.
Rachel Hoffman
•
Mar 6, 2026Mar 6, 2026
Structural Inspection vs. Home Inspection: Which Is Right for You?
Knowing the difference between structural inspections vs. home inspections is easy with this convenient guide. Learn when you might get each one done.
Dan Simms
•
Apr 9, 2026Apr 9, 2026
Why You May Need to Hire a Structural Engineer for a Home Inspection
Learn why it might be a good idea to hire a structural engineer for a home inspection in addition to a general home inspector when you’re purchasing a home.