Top-rated asphalt driveway pros.

Get matched with top asphalt driveway pros in Casco, WI

Enter your zip and get matched with up to 5 pros

Need a pro for your asphalt driveway service project in Casco, WI?

Select your specific project to find the pro for you.

Find Asphalt driveway pros in Casco

Hip & Ridge Construction
4.5(
6
)

Serving Casco, WI and surrounding areas

In business since 2011

Free estimates

Credit card accepted

"When they were here they worked all day. However there were many days when they had to go to other jobs and that caused delays on our project. Project took much longer than we thought it would. Had a hard time communicating, many times only got voice mail.Seemed to us the contractor had too many jobs going on at the same time. We did not feel our project was a high priority. Overall we are happy with the results but were quite frustrated at times"
Recommended by100%of homeowners
Asphalt Driveways questions, answered by experts

Driveways should be sloped with a minimum 2% slope—anything lower will cause precipitation and runoff to collect. A 2% slope is the equivalent of a 2-foot rise over 100 feet. One quick way to check the integrity of your driveway’s slope: no more than four inches of water should collect on the surface longer than 15 minutes after rain.

Asphalt and tarmac are not the same thing. Traditional tarmac, short for tarmacadam, uses tar as a binder to hold crushed stone together. Asphalt uses bitumen—a byproduct of crude oil—to bind aggregate. Though tarmac was once a go-to for roads, asphalt has become the modern standard. And these days, most surfaces referred to as “tarmac” are actually asphalt. So, while the names may overlap, the key distinction lies in the binder—tar for tarmac and bitumen for asphalt.

Since it has a smoother surface using a mixture of finer rock and sand, 41A tends to be the best asphalt grade for a driveway, especially for residential driveways. Other options are available, but more homeowners choose 41A for a smoother asphalt driveway. Talk with your asphalt driveway professional for recommendations of the best grade for your specific driveway.

A driveway approach is the part of a driveway where the public road meets the private driveway. This section contains several key elements, including the driveway apron, the curb cut, and the end slope. Depending on the slope of the driveway, this area may also contain the trench drain.

Many asphalt companies have experience with tar and chip paving, but not all. The process is unique enough—and not incredibly common enough—that you may have to look around for a tar and chip specialist. However, speaking with a driveway company is a great place to start, especially if they have experience with multiple materials.

The Casco, WI homeowners’ guide to asphalt driveway services

From average costs to expert advice, get all the answers you need to get your job done.

What do you need done? We’ll find top pros.
  • 🌱 "Mow a small front yard"
  • 🛠 "Fix a leaking pipe under the sink"
  • 🏠 "Repair shingles on an asphalt roof"