Get matched with top deck and porch pros in Boulder Junction, WI

Any wood deck provides some ventilation to the area below, as is the nature of that type of deck design. However, areas that experience excessive humidity and associated moisture benefit greatly from a dedicated ventilation system in the form of strip vents. This addition helps the various wood boards contract and expand evenly throughout the years and reduces the chances of twisting, warping, and buckling.

You can either nail or screw deck boards according to your preference. We recommend using 3-inch galvanized deck screws in this guide because screws offer superior holding powder over time. If you’re using screws, you can minimize the risk of cracking the boards by drilling small pilot holes before securing the boards to the deck joists.

The main cause of a rotting porch post is prolonged exposure to moisture. So, the best way to prevent rot is to eliminate and guard against moisture.

• Use wood caulk to seal any cracks, openings, or areas along the post where water is likely to pool.

• Secure porch posts into concrete, if possible.

• Cover wooden posts with protective sleeves or wraps, often made of vinyl.

• Install metal post anchors for extra support.

Yes, but it works best with lightweight snowblowers, the single-stage models or electric versions. Also, you need to have a rubberized intake edge on the ground and preferably rubberized auger paddles, not a metal version. Otherwise you may chip or damage the surface as you work. When it doubt, let the snow lie.

You can also use a snow blower on leveled gravel, but only if you carefully adjust the intake height so it doesn’t kick up the gravel and turn it into flying missiles.