Top-rated countertop and backsplash pros.

Best countertop and backsplash pros near Argonne, WI

Enter your zip and get matched with up to 5 pros

Need a pro for your countertop and backsplash service project in Argonne, WI?

Select your specific project to find the pro for you.

Top-Rated Countertop and backsplash pros in Argonne - Updated Nov 2026

Hip & Ridge Construction
4.5(
6
)
Laminate Countertops - InstallLaminate Countertops - RepairSolid Surface Countertops - Install (Concrete, Stainless Steel, etc)+3 more

Serving Argonne, WI and surrounding areas

In business since 2011

Free estimates

Credit card accepted

"The roofers were extremely professional and nice. They found that the previous roofers did not put flashing around the skylights. All of the wood around them was rotten. They had to take all six skylights out to replace the wood. They did it with minimal dust inside. They took the time to put extra ice and snow barriers around the skylights. They went above and beyond. I would recommend Brian and his crew to anyone. Todd from Hip and Ridge Construction is friendly, professional and honest."
Recommended by100%of homeowners
Rocksolid Cabinetry
New to Angi
Laminate Countertops - InstallSolid Surface Countertops - Install (Concrete, Stainless Steel, etc)

Serving Argonne, WI and surrounding areas

In business since 2010

Free estimates

Credit card accepted

With over 30 years of experience in construction and 6 years experience specializing in cabinets, we take great pride in our extreme professionalism, timeliness and superior customer service on every job. We make sure to develop a lasting relationship so there will be no question on who to call the next time service is needed. Your satisfaction is guaranteed! \n

M & L Masonry and Home Improvement
New to Angi
Stone Slab Countertops - Install (Granite, Marble, Quartz, etc)Stone Slab Countertops - Repair (Granite, Marble, Quartz, etc)

Serving Argonne, WI and surrounding areas

In business since 2022

Free estimates

Emergency services offered

M And L Masonry And Home Improvement is committed to excellence in every aspect of our business. We uphold a standard of integrity bound by fairness, honesty, and personal responsibility. Our distinction is the quality of service we bring to our customers. Accurate knowledge of our trade combined with ability is what makes us true professionals. Above all, we are watchful of our customers' interests, and make their concerns the basis of our business.

Response time12 hrs
Countertops and Backsplashes FAQs, answered by experts

The frequency for sealing granite countertops depends on several factors, including the type of sealant used, the color of the granite, and how heavily the countertops are used. As a general guideline, resealing is often recommended every 12 to 18 months, but some sources suggest it could be as often as every few months or at least once a year.

The type of sealant is a major factor: water-based sealants may need reapplication every six months to a year, while more durable solvent-based sealants can last for five to 10 years. Additionally, factors like heavy kitchen traffic, frequent use of acidic cleaners, and lighter granite colors may require more frequent sealing to prevent staining.

To determine if your countertops need resealing, you can perform a simple water test. Place a few drops of water or a wet paper towel on an inconspicuous area of the granite. After 10 to 15 minutes, check the spot. If the water has beaded up, the seal is still intact. If the water has been absorbed and darkened the stone, it's time to apply a new coat of sealant. You can choose to seal the granite yourself or hire a professional to ensure it's done correctly.

Yes, you can install a new layer of laminate over an existing laminate countertop, which can save you time and money while updating its appearance. The process is similar to installing laminate directly onto particle board. First, clean the existing countertop thoroughly. Next, fill and sand any cracks or damaged areas. Then, you'll need to sand or scratch up the entire surface to help the contact cement or glue adhere properly. After applying the adhesive, you can install the new laminate layer on top. If you're looking for other ways to improve your existing laminate countertops, you could also consider painting them or applying an epoxy finish.

You can save some money on countertops by going the DIY route, though it can be risky. Laminate is attractive for cost-conscious homeowners, as it can mimic natural materials like granite and wood. It’s also easy to install. Other inexpensive options include ceramic tile, porcelain tile, and butcher block. For serious savings, skip a full replacement and refinish the pre-existing countertop. 

The best way to save money on countertop installation is to choose an affordable material. For example, if you have a busy kitchen and need durability, choose a more affordable but lasting material like granite countertops. Likewise, if you don't use your countertops often, you can use a softer material that costs less than more sturdy ones. 

Another way to cut costs is to remove and dispose of the existing countertops yourself, if possible. That way, countertop installers can get straight to placing the new feature, reducing labor costs.

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.

The Argonne, WI homeowners’ guide to countertop and backsplash services

From average costs to expert advice, get all the answers you need to get your job done.