Get matched with top contractors in Republic, WA

Q: What is the best angle for bracing?

• <div><p>A cross brace for a fence gate should stretch from the top corner of the gate&rsquo;s hinge side to the bottom corner of its latch side at a 45-degree angle to the bottom of the gate. This positioning distributes the bulk of the gate&rsquo;s weight to the base of the post, taking pressure off the top hinge.</p></div>

Q: Do I have to use wood to frame a house?

• <div><p>One of the most common <a href="https://www.angi.com/articles/bare-bones-guide-framing-house.htm">house framing basics</a> for decades has been using wood for the framing work. However, some framing contractors now suggest using steel frames. Steel is lightweight, resistant to fire, and resistant to moisture, all of which are areas where wood framing could cause problems. However, steel framing is more expensive than wood and limits your ability to insulate the home.</p></div>

Q: How much does it cost to install a bow window?

• <div><p>The cost to install a bow window can range from $1,500 to $15,000, with a national average of $3,900. The total price includes materials, which can cost between $1,200 and over $14,000, and labor, which typically adds $300 to $1,900. Several factors influence the final cost, including the window's size and frame material. For example, vinyl frames are the most budget-friendly option, while wood frames are more expensive. Custom features or energy-efficient upgrades will also increase the price. For comparison, a bay window installation typically costs between $1,000 and $7,000.</p></div>

Q: Should I use 2x6 or 2x8 for deck joists?

• <div><p>When deciding if you should use 2x6 or 2x8 deck joists, consider the size of the deck, joist spacing, and materials. Larger decks, larger-spaced joists, and weaker wood all require more support, meaning they need larger joists. For example, 2x8 redwood joists spaced 16 inches apart can only safely span up to 10 feet and 7 inches. On the other hand, 2x10 southern pine joists spaced 12 inches apart can be as big as 16 feet and 2 inches. If you aren&rsquo;t sure what size joist is best for your project, speak with your deck builder.</p></div>

Q: How can I find ceiling joists using simple tools like a hammer or a nail?

• <div><p>Yes, you can find ceiling joists using simple tools if a stud finder isn't available.</p><p>Using a hammer requires patience and a keen ear. Gently tap the ceiling in a grid pattern, listening for sound changes. A hollow sound indicates space between joists, while a solid, dull thud suggests a joist. Mark the location with a pencil and confirm by tapping from different angles.</p><p>Alternatively, you can use a nail, but this method will leave small holes. You'll feel increased resistance when the nail hits a joist. Mark the spot and repeat the process every 16 or 24 inches to map the joist locations. This method is considered less reliable than using a stud finder.</p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your contractor service project in Republic, WA?

Select your specific project to find the pro for you.

Verified Reviews for Contractor Service pros in Republic, WA

*The Angi rating for Contractor Service companies in Republic, WA is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Contractor Service needs.

*The HomeAdvisor rating for Contractor Service companies in Republic, WA is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Contractor Service needs.

Last update on February 13, 2025

Reviewed in February 2025
Hi, Rick Metzger was the technician that came to our house to measure all the windows and doors we are having renewal by Anderson replace for us. He was very professional in all dealing with us and answered all of our questions. He gave us confidence in the workmanship that will be provided...
Renewal by Andersen of Washington
Request a quote
Reviewed in October 2024
Very nice and respectful young man. Everything went well 😉
Kannon Ball LLC
Request a quote
Reviewed in September 2024
Chris, our installer, worked professionally , was very knowledgeable about the product, he answered all our questions. He did awesome job for us.
All Valley Insulation LLC
Request a quote
Reviewed in May 2024
They were timely and communication was excellent.
Kannon Ball, LLC
Request a quote
Reviewed in November 2021
It went smoothly and was done on time
Eagle Home Services Inc
Request a quote
Reviewed in August 2020
These great people replaced a leaking ridge on our home, fixed two leaking corners, and installed sheathing and a roof on our new 800 square foot studio. They have been roofing for thirty years and their skill is really evident. They are fast, hard working, pleasant, capable, and very fair with...
Peterson Northwest Inc.
Request a quote
Reviewed in March 2020
I've used them for painting and other projects and they have always done a fine job. I plan to use them again this Summer for more work on my home.
Tigertown Painting & Handyman
Request a quote
Reviewed in April 2018
Great! Scott did a quality job and was very easy to work with. The best part was that he was very clear in his pricing, itemizing every invoice and reviewing it with us before every payment that was due.
Wiggins Construction
Request a quote
Reviewed in October 2017
He was on time, very polite and did a awesome job.
Derrick Moss Roof Care
Request a quote

Find Contractors in Republic

Becker Design Consulting

4.7(

)

Serving Republic, WA and surrounding areas

In business since 2008

"Well, it was fun as well as giving me just what I wanted for my house.....more light, more privacy, and aesthetics. The nice thing about Tim, aside from the fact that he's a nice person and very intelligent, and gifted in his field, is that he listens and makes you part of the process. I felt totally at ease and secure giving him keys to my house for work that was done when I wasn't there. My house maintains it's old feel (he blended the new with the old) as well as contributing to making it an even more beautiful house."

Recommended by87%of homeowners

Serving Republic, WA and surrounding areas

In business since 2010

Free estimates

Emergency services offered

"Harold and his crew did an amazing job. H&M gave us the lowest bid on removing three large evergreens trees. The high bid was 3 times what Harold's quote was! Harold and his crew were prompt, professional, considerate and went way above and beyond our expectations. Thank you H&M!"

Recommended by100%of homeowners

Serving Republic, WA and surrounding areas

In business since 1988

Free estimates

Emergency services offered

"Did what they said they would do
Kept the dust and mess in a controlled area and cleaned everything up afterwards
"

Recommended by93%of homeowners

Request Quote

Tiny Living Golden Concept LLC

4.9(

)

Serving Republic, WA and surrounding areas

In business since 2023

Free estimates

Emergency services offered

"Excellent! Phenomenal contractor!! You cannot beat his prices! Plus he does some in house financing, so you don’t have to put off projects ❤️ in our economy he makes it possible for people to get things done, I highly, highly recommend Chris!"

+12

Recommended by100%of homeowners

Serving Republic, WA and surrounding areas

In business since 2000

Free estimates

Credit card accepted

"The team at Floorcoverings NW communicated with me through the whole process and were able to finish the tile in the bathroom and carpet in the basement in the time frame we discussed."

+12

Recommended by100%of homeowners

Serving Republic, WA and surrounding areas

In business since 2006

Credit card accepted

"I never contacted the provider or used this service in anyway. I have to
write this review so that the request to write this review stops
popping up.
The rating is bogus as it is required to be able to submit.
"

California Client Saves with HMD Designer Discounts

Recommended by54%of homeowners

Request Quote

Jill Seidner Interior Design

3.5(

)

Serving Republic, WA and surrounding areas

In business since 2006

Credit card accepted

"Once I sent her all the measurements, it took her a little while to get the options back to me. Overall, they're good designs. However, they're very simplistic and give general ideas for space planning. I was hoping to have a better idea for sizes of furniture for the space and some variations on staging.
Jill was very responsive when I did have a question. I'm not sure how helpful it is to have a virtual design done. If we lived in similar cities, I'd probably use her again for help with additional designs.
"

Recommended by55%of homeowners

Serving Republic, WA and surrounding areas

In business since 1997

Credit card accepted

"It was a good experience. They were very professional, told us what they were doing, came and inspect, and finish the job in a timely manner."

Recommended by100%of homeowners

Request Quote

Hampton Enterprise LLC

3.7(

)

Serving Republic, WA and surrounding areas

In business since 1989

Free estimates

Emergency services offered

"I only use James when I need some work done to my house. He responds fast, gets the work done quicker than just about anyone else I've ever used and seems very concerned with leaving his customers happy."

Recommended by60%of homeowners

Request Quote

Browns General Contracting

5.0(

)

Serving Republic, WA and surrounding areas

In business since 2022

Free estimates

Emergency services offered

"Great job! My wife and I are very satisfied with the work done. We need some more remodeling done on our home and will be calling Browns general contracting."

This is one of our roof projects! We laid ridge cap and she looked beautiful.

The small garage got a new metal roof! This made her home look amazing.

+12

Recommended by100%of homeowners

Request Quote

Showing 1-10 of 21

Unfinished Carpentry questions, answered by experts

A cross brace for a fence gate should stretch from the top corner of the gate’s hinge side to the bottom corner of its latch side at a 45-degree angle to the bottom of the gate. This positioning distributes the bulk of the gate’s weight to the base of the post, taking pressure off the top hinge.

One of the most common house framing basics for decades has been using wood for the framing work. However, some framing contractors now suggest using steel frames. Steel is lightweight, resistant to fire, and resistant to moisture, all of which are areas where wood framing could cause problems. However, steel framing is more expensive than wood and limits your ability to insulate the home.

The cost to install a bow window can range from $1,500 to $15,000, with a national average of $3,900. The total price includes materials, which can cost between $1,200 and over $14,000, and labor, which typically adds $300 to $1,900. Several factors influence the final cost, including the window's size and frame material. For example, vinyl frames are the most budget-friendly option, while wood frames are more expensive. Custom features or energy-efficient upgrades will also increase the price. For comparison, a bay window installation typically costs between $1,000 and $7,000.

When deciding if you should use 2x6 or 2x8 deck joists, consider the size of the deck, joist spacing, and materials. Larger decks, larger-spaced joists, and weaker wood all require more support, meaning they need larger joists. For example, 2x8 redwood joists spaced 16 inches apart can only safely span up to 10 feet and 7 inches. On the other hand, 2x10 southern pine joists spaced 12 inches apart can be as big as 16 feet and 2 inches. If you aren’t sure what size joist is best for your project, speak with your deck builder.

Yes, you can find ceiling joists using simple tools if a stud finder isn't available.

Using a hammer requires patience and a keen ear. Gently tap the ceiling in a grid pattern, listening for sound changes. A hollow sound indicates space between joists, while a solid, dull thud suggests a joist. Mark the location with a pencil and confirm by tapping from different angles.

Alternatively, you can use a nail, but this method will leave small holes. You'll feel increased resistance when the nail hits a joist. Mark the spot and repeat the process every 16 or 24 inches to map the joist locations. This method is considered less reliable than using a stud finder.

The Republic, WA homeowners’ guide to contractor services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Angi
•
May 30, 2026May 30, 2026
How Much Does Carpentry Framing Repair Cost? [2026 Data]
Get the latest carpentry framing repair cost estimates. Learn what impacts your price and how to budget for your framing repair project.
Angi
•
Mar 18, 2026Mar 18, 2026
How Much Do Carpenters Charge Per Hour? [2026 Data]
Find out how much carpenters charge, including average rates, cost factors, and tips to help you budget for your next carpentry project.
Kate Fann
•
May 30, 2026May 30, 2026
How Much Does It Cost to Install Shiplap? [2026 Data]
The cost to install shiplap siding or wall surfaces in your home depends on several factors, including the material type and the size of your project.
Jenna Jonaitis
•
May 22, 2026May 22, 2026
A Complete Guide to Common Carpentry and Construction Terms You Should Know
When you’re tackling a project or hiring a contractor, it’s helpful to know key carpentry terms. From end grain to dovetail joints, here’s a complete list.
Matt Marandola
•
May 22, 2026May 22, 2026
How to Hire a Qualified Pro for House Framing
House framing is one of the first parts of building a home. To do this, you’ll want to hire a rough or unfinished carpenter. Using this guide, you’ll know what questions to ask and where to look for your house framing contractor.
Mariel Loveland
•
May 22, 2026May 22, 2026
The A-to-Z Guide to Unfinished Cabinets
Buying unfinished cabinets can help you create the custom remodel of your dreams, but is it worth the fuss? This guide will tell you everything you need to know.