Get matched with top fencing pros in Fox Island, WA

Goats need at least 250 square feet of space each, but that’s if you’re also supplementing hay. Since goats are social animals, you’ll want to avoid renting only one goat, which would take a long time to clear your land, anyway. Instead, opt for at least two goats per 500 square feet of land. Most rental companies will only rent out goats by the acre, but check your local goat rental companies to see if they make exceptions.

While power washing isn't a requirement before you stain a fence, it can make the job much easier and faster while reducing manual labor requirements. The stain will not work if the wood is full of dirt and dust, so power washing, sometimes called pressure washing, is a fast and effective way to prepare the wood for staining. Remember that you need to stain or repaint relatively soon after the wood has dried so that there isn’t time for dust and dirt to build up again. 

Whether you need a permit to build or install a fence depends on several factors, including your location, the fence's height, its placement in your yard, and the materials used. In many cities and highly populated areas, a permit is required, especially for fences taller than 6 feet. Conversely, rural areas may have fewer restrictions. Typically, backyard privacy fences 6 feet or shorter do not require a permit, while front yard fences often have a lower height limit, sometimes as low as 3.5 feet. There can also be exceptions for properties in mixed residential-commercial zones. It's best to check with your local building inspection or zoning department to understand the specific requirements, height restrictions, and location rules for your area. A professional fence installer can help you navigate this process and often secure the necessary permits for you, though this may extend the project timeline.

The cost to build a fence is about $3,100 on average, but you could pay anywhere from $400 to $13,700 or more. Your cost will depend on the length, height, and materials for the fence. If you hire a professional installer, labor costs typically represent about half of the total cost of the project. This means you potentially can save quite a bit of money doing the work yourself.