Will rubbing alcohol damage countertops?

• <div><p>Rubbing alcohol won’t damage most countertops, and you can mix it with water to create a disinfecting spray to keep your kitchen clean. It’s safer than using bleach on countertops, which can stain and cause discoloration. Be careful with rubbing alcohol when it comes to lacquered or varnished surfaces, though.</p></div>

What tools and blades are recommended for cutting Corian?

• <div><p>Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.</p><p>The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.</p><p>It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.</p><p>Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.</p></div>

Top-rated countertop and backsplash pros.

Get matched with top countertop and backsplash pros in Wells, VT

Q: What tools and blades are needed to cut Corian?

• <div><p>Yes, Corian&reg; and other solid surface materials can be cut with standard woodworking tools, such as a circular saw or a jigsaw. However, it is crucial to use the correct type of blade to avoid damaging the material.</p><p>For a circular saw, a tungsten carbide-tipped blade is required; a triple chip grind blade is highly recommended. For a jigsaw, you should use a fine-tooth down-cutting blade. Do not use blades designed for cutting wood, as they can cause microfractures that weaken the edges of the countertop. A diamond blade is also unnecessary, as those are designed for harder materials like natural stone, which Corian is not.</p><p>After cutting, the edge will be rough. It is essential to sand and smooth the cut edge to prevent microfractures, which can eventually compromise the integrity of the countertop.</p></div>

Q: Will rubbing alcohol damage countertops?

• <div><p>Rubbing alcohol won&rsquo;t damage most countertops, and you can mix it with water to create a disinfecting spray to keep your kitchen clean. It&rsquo;s safer than using bleach on countertops, which can stain and cause discoloration. Be careful with rubbing alcohol when it comes to lacquered or varnished surfaces, though.</p></div>

Q: Does Gorilla Glue work on laminate countertops?

• <div><p>Original Gorilla Glue is not a good choice for laminate countertops. It is not a contact cement, which is the best choice for this material, and it does not explicitly state that it should be used on laminate. Perhaps the best reason to avoid using Gorilla Glue on laminate is that it expands three times its original size, which could lead to your laminate being pushed away from the countertops.</p></div>

Q: How do you seal recycled glass countertops?

• <div><p>Most recycled glass countertops are nonporous, so they don&rsquo;t require sealant. There is, however, one major exception. If your recycled glass countertop contains a cement binder, it&rsquo;ll require an additional layer of protection. Seal these countertops once or twice a year. Use a concrete sealant and finish it with a food-safe wax for a gorgeous and shiny finish. Otherwise, just clean the countertop regularly and always use a cutting board.</p></div>

Q: What tools and blades are recommended for cutting Corian?

• <div><p>Yes, Corian&reg; and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.</p><p>The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.</p><p>It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.</p><p>Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.</p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your countertop and backsplash service project in Wells, VT?

Select your specific project to find the pro for you.

Verified Reviews for Countertop And Backsplash Service pros in Wells, VT

*The Angi rating for Countertop And Backsplash Service companies in Wells, VT is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Countertop And Backsplash Service needs.

*The HomeAdvisor rating for Countertop And Backsplash Service companies in Wells, VT is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Countertop And Backsplash Service needs.

Last update on May 02, 2026

Reviewed in May 2026
Total Property Inspections was quick to reach out to me about a new home inspection I needed. They were prompt, super communicative, friendly and reasonably priced. I received very informative and thorough explanations and I would highly recommend them!
Total Property Inspections
Request a quote
Reviewed in April 2025
Came and washed the house and made it look like new again! Very quick and does an amazing job
Pro Wash, LLC
Request a quote
Reviewed in January 2025
The painters were very fast and did an amazing job. They made sure everything was looking good at the end of each day and communicated well to make sure we got exactly what we were hoping for, and were able to take on an extra wall patch job at the same time. Our house went from showing its age...
Missi Painting
Request a quote
Reviewed in September 2024
Davis Stone works designed and installed walkways, stairs, raised flower bed around the house four years ago and it still looks beautiful.
Davis Stone Works
Request a quote
Reviewed in January 2024
Vinnie and crew came in and helped us create a driveway with additional parking areas. They had the machinery to remove old, rotted tree stumps that were causing our driveway to sink, and then excavated and reshaped the way the front of our home is presented by designing a beautiful crushed red...
The Solutions Construction
Request a quote
Reviewed in January 2024
The crew at Sparkling Clean Solutions went above and beyond to make our project a success. They reached out to me on the phone in response to my Angi's request, which was a much appreciated personal touch. The crew was on site within 48 hours to assess the job firsthand and provide a fair and...
Sparkling Clean Solutions
Request a quote
Reviewed in July 2023
He has rebuilt my bathroom from studs up and it came out great and even showed me what other people meesed up. He also took out my bay window and put new windows in.
Legacy Properties & Development LLC
Request a quote
Reviewed in October 2022
Preserving the historic character of my c. 1790 church, currently being restored and renovated into a private residence, was a key concern going into mold remediation. Other companies told me that the entire building would need to be gutted to the studs. I was immediately comfortable and set at...
NU-Life Resources
Request a quote
Reviewed in September 2022
This was a deep clean and organization on a limited budget. We can actually use our closets again!
Coton Cleaning Services
Request a quote
Reviewed in May 2021
Alfredo and his team are excellent. They've worked for me for more than 23 years and they are hard-working, completely trustworthy, and do an excellent job. I would recommend Alfredo, Lupe, and their crew to anyone looking for reliable housecleaning.
Torres House Cleaning
Request a quote

Find Countertop and backsplash pros in Wells

Tejada's Remodeling Inc

4.7(

)

Laminate Countertops - InstallLaminate Countertops - RepairSolid Surface Countertops - Install (Concrete, Stainless Steel, etc)+3 more

Serving Wells, VT and surrounding areas

Approved

Super Service Award Winner

In business since 2024

Free estimates

Warranties offered

"Prompt response… very professional! I have been without a sink for two weeks, called a few companies and no follow up.. Tejadas was able to fit me in right away.. they were at my home on time and did a great job cutting my granite countertop and positioned my sink to get installed by the plumber… I would definitely hire them again for any future jobs"

Response time2 days

Response rate100%

6 neighbors recently requested a quote

Request Quote

Bowen Ridge Construction

4.6(

)

Laminate Countertops - InstallLaminate Countertops - RepairSolid Surface Countertops - Install (Concrete, Stainless Steel, etc)+3 more

Serving Wells, VT and surrounding areas

Approved

In business since 2016

Free estimates

Warranties offered

"Joe and his team put a beautiful addition on to my house. He did a great job of communicating and worked with us on pricing throughout. I would recommend him without hesitation."

+106

2 neighbors recently requested a quote

Recommended by100%of homeowners

Request Quote

Darling Builders LLC

New to Angi

Laminate Countertops - InstallLaminate Countertops - Repair

Serving Wells, VT and surrounding areas

Approved

Small jobs welcome

Working throughout New England, we specialize in customized home renovation and new construction from framing to finishing. Whether the project is a complete home renovation, a kitchen remodel, or a garden shed, we try to keep the project flexible and help clients realize the best version of their vision. Based out of our workshop in Vermont, we offer a range of services including framing, flooring, tile, finish carpentry, and more.

Request Quote

Vista Home Improvement

4.3(

419

)

Laminate Countertops - InstallLaminate Countertops - RepairSolid Surface Countertops - Install (Concrete, Stainless Steel, etc)+3 more

Serving Wells, VT and surrounding areas

In business since 2005

Free estimates

Emergency services offered

"Thanks for your services was nice experience to has business ? with you I home my wishes come true no more Abuse, sickness, hungry, or homeless, My Broking Heart"

+41

Recommended by87%of homeowners

Request Quote

Apex Stone Innovations, LLC

5.0(

)

Stone Slab Countertops - Install (Granite, Marble, Quartz, etc)Stone Slab Countertops - Repair (Granite, Marble, Quartz, etc)

Serving Wells, VT and surrounding areas

In business since 2015

Free estimates

"Nicholas was very prompt and he is true craftsman. He was very reasonable in his pricing. I was genuinely impressed with the quality and craftsmanship of his work."

Recommended by100%of homeowners

Request Quote

Rob Parker General Contractor

2.8(

)

Laminate Countertops - InstallLaminate Countertops - RepairSolid Surface Countertops - Install (Concrete, Stainless Steel, etc)+3 more

Serving Wells, VT and surrounding areas

In business since 1982

Free estimates

"Rob and his team did a fantastic job transforming our house into an amazing showcase. Our project was a big challenge and involved extensive renovation on all three floors including plumbing and electrical. Rob's attention to detail and dedication to our project is very evident in the outcome. I would recommend Rob to anyone who has a major renovation in mind. Rob is a perfectionist and is a pleasure to work with. We cannot thank him enough."

Response time2 days

Recommended by80%of homeowners

Request Quote

RLB Construction, LLC

4.2(

)

Solid Surface Countertops - Install (Concrete, Stainless Steel, etc)Stone Slab Countertops - Install (Granite, Marble, Quartz, etc)

Serving Wells, VT and surrounding areas

In business since 2015

Credit card accepted

"Courteous. Did a good Job."

+20

Response time6 days

Recommended by66%of homeowners

Laminate Countertops - Install

Serving Wells, VT and surrounding areas

In business since 1996

Free estimates

Emergency services offered

Here at LeClair Renovations, you will be very pleased with our services. We are honest and hard working. We focus on eco-friendly building solutions whenever possibe. We strive to maintain a high level of service and quality from start to finish. Projects will be 100% to your satisfaction! Call us today for a free estimate!

+33

Recommended by100%of homeowners

Request Quote

BKM

New to Angi

Laminate Countertops - Install

Serving Wells, VT and surrounding areas

We have been doing kitchen installations for the past 20 + years. We service the Albany area Saratoga area and all throughout Vermont. Typical demolitions and reinstallation will be accomplished in a two day time period. We pride ourselves on complete customer satisfaction.

Request Quote

Crown up construction

New to Angi

Laminate Countertops - InstallLaminate Countertops - RepairSolid Surface Countertops - Install (Concrete, Stainless Steel, etc)+3 more

Serving Wells, VT and surrounding areas

I am a carpenter that has been in business for 10 years and been in construction for 20+. I can build your home, addition, renovation or anything else you can challenge me with.

Request Quote

Showing 1-10 of 12

Countertops and Backsplashes questions, answered by experts

Yes, Corian® and other solid surface materials can be cut with standard woodworking tools, such as a circular saw or a jigsaw. However, it is crucial to use the correct type of blade to avoid damaging the material.

For a circular saw, a tungsten carbide-tipped blade is required; a triple chip grind blade is highly recommended. For a jigsaw, you should use a fine-tooth down-cutting blade. Do not use blades designed for cutting wood, as they can cause microfractures that weaken the edges of the countertop. A diamond blade is also unnecessary, as those are designed for harder materials like natural stone, which Corian is not.

After cutting, the edge will be rough. It is essential to sand and smooth the cut edge to prevent microfractures, which can eventually compromise the integrity of the countertop.

Rubbing alcohol won’t damage most countertops, and you can mix it with water to create a disinfecting spray to keep your kitchen clean. It’s safer than using bleach on countertops, which can stain and cause discoloration. Be careful with rubbing alcohol when it comes to lacquered or varnished surfaces, though.

Original Gorilla Glue is not a good choice for laminate countertops. It is not a contact cement, which is the best choice for this material, and it does not explicitly state that it should be used on laminate. Perhaps the best reason to avoid using Gorilla Glue on laminate is that it expands three times its original size, which could lead to your laminate being pushed away from the countertops.

Most recycled glass countertops are nonporous, so they don’t require sealant. There is, however, one major exception. If your recycled glass countertop contains a cement binder, it’ll require an additional layer of protection. Seal these countertops once or twice a year. Use a concrete sealant and finish it with a food-safe wax for a gorgeous and shiny finish. Otherwise, just clean the countertop regularly and always use a cutting board.

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.

The Wells, VT homeowners’ guide to countertop and backsplash services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Deirdre Sullivan
•
Jul 9, 2026Jul 9, 2026
How Much Do Caesarstone Countertops Cost? [2026 Data]
Are you getting close to deciding on Caesarstone® countertops for your home? Discover all the details behind Caesarstone® countertop costs in this guide.
Jill Harness
•
Aug 3, 2026Aug 3, 2026
How Much Do Porcelain Countertops Cost? [2026 Data]
The cost of porcelain countertops is affected by many factors, primarily the material's type (tile or slab) and finish, as well as your counter’s size and shape.
Haley Nothstein
•
Aug 3, 2026Aug 3, 2026
What Is the Average Cost of Laminate Countertops? [2026 Data]
Discover the cost of installing laminate countertops, including how their size, material, and finish impact your total price.
Deane Biermeier
•
Jul 9, 2026Jul 9, 2026
Do You Need a Backsplash in Your Kitchen? Beautify and Protect Your Remodel
Do you need a backsplash? Technically, no. However, installing one in your kitchen can add beauty and help avoid costly repairs. Here's how and why.
Stephanie Mickelson
•
Jul 9, 2026Jul 9, 2026
Countertop Square Footage Calculator: How Much Countertop Do I Need?
When it’s time for new countertops, this calculator will help you know how much countertop you need to complete your project.
Kelly Weimert
•
Jul 9, 2026Jul 9, 2026
4 Popular Kitchen Backsplash Ideas to Elevate Your Aesthetic
From protecting your walls from cooking spatter to solidifying your aesthetic, these backsplash ideas will elevate the form and function of your kitchen.