Get matched with top carpenters in Selma, VA

"Found Sentri on Angi. Jeanette and Violet were very pleasant and efficient in getting a contractor to me in the time frame needed. The contractor was excellent and the roof looks great! I would definitely work with them again if I had additional projects."

"This was a very involved plaster repair and remediation job, in a very old house. Grady is the only person (or company) who was willing to take on the job and drive all the way from Pennsylvania to our home in Northern Virginia. There are very few people who do this kind of work anymore (we really searched) and he is an expert in his field. We needed to work around his schedule, because he is in demand in the tri-state area, so it took awhile to schedule the work to begin... but it was worth it."

Im a hardworking and dependable worker based in Virginia with experience in Commercial & residential construction, hauling, equipment operation, property maintenance, and outdoor labor. I take pride in doing quality work, showing up on time, and treating every job like it’s my own property.\n\nI’m available for jobs throughout the surrounding areas and willing to travel for the right project. My skills include general labor, demolition, hauling, light carpentry, land clearing, drywall work, concrete prep, equipment operation, and property cleanup.\n\nCustomers hire me because I communicate well, work efficiently, and focus on getting the job done right the first time. I’m always willing to take on new challenges and provide reliable service at a fair price.\n

"Found the piece in a curio type used furniture store in College Park, MD (Peg Leg). It was painted pink. Got it for a great price but it needed restoration. Wilson's quote was along the line of other furniture we had restored over the years. The piece came back looking like new. Apparently under the pink there was another coat of white and it took extra time to strip all the layers. You have to be patient with the process because his time estimate might be off if he hits a snag like he did with mine. In the end we have a beautifully restored antique piece of furniture that looks like it just came off the showroom floor. See before (pink) and after photos."

"It went very well, and was a lot of work. The yard looks clean and now hope a lot of the grass grows back! Thanks to Tyler for doing this!"

"Happy with the work done"

K&M Quality Carpentry, LLC is a privately owned business with more than 20 years in the\nresidential construction and remodeling business. Have been doing business VA, MD, and the\nDistrict of Columbia since 1994.\n• Contractor\nAs your Contractor, we focus on all the project details to ensure a satisfactory outcome\nfor you. We ensure that all permits for each phase of the project meet or exceed state and\nmunicipal building codes.\nK&M Quality Carpentry, LLC serves as a sub-contractor for many General Contractors\nin the area.\nWe pride ourselves on all the projects we undertake and focus on delivering quality and\nsatisfaction.\n• Repair and upgrades\nNew Customs Homes\nRoofing Flooring\nSiding Doors\nWindows Decks\nPorches Int/Ext Painting\nInsulating Garages\nGazebos Saunas\nCustom Cabinetry Custom Trim\nWood Ceilings Additions\nRemodeling (specializing in Kitchens & Bathrooms)\nIf you have a project or repair that doesn't appear on this list, contact me and I’ll try to meet your\nneeds or refer you to someone who specializes that particular area.\nLicensed (Class A) & Fully Insured

"2 gentleman from Walls Construction and Handyman came out and cleaned gutters thoroughly. While there they did free roof inspection and found that 2 roof boots were cracked. They notified me and I told them to go ahead and repair them. They are one of the most outstanding companies I have ever had come out and do work on my house. Greg Maratto was very polite, experienced and just an over all joy. The office staff was also very polite and professional. I would definitely recommend using this company for any of your construction/handyman needs.
"

"Hello, My name is Phil Carr-Jones, I am reviewing my experience of working with and building my own kitchen, using cabinets and doors from Arkansas Wood Door. While I am an Episcopal Priest, it turns out I get to do a lot of things they don't teach you in seminary. Over the years, I have had to get fairly skilled in all the trades, including, no surprise, carpentry. But I am by no means an expert. For instance, I employed a retired carpenter to help out with the crown molding and other trim. Apart from that though, this is all my and my wife's work. So let me state up front, Arkansas Wood Doors is the go to place for the DIY’er who is thinking of remodeling their own kitchen. Here's why: I searched the web for months, literally doing comparisons and research on flat pack rta cabinets. I went to the big box store for a design and pricing in their three lines of cabinets, and I went in for a consult with a small custom shop in my area. Here's what I found. 99 outof 100 rta cabinet companies have their product made in china which means the standards for formaldehyde are going to be as fishy as they smell, plus you can only get cabinets in fixed sizes so if you looking to eeck out every last inch of space you're going to lose a lot and you'll be using a lot of filler strips wasting what could have been useful storage. If you want to go custom, then you only have less than a handful of online options, companies that will make to order in any dimension. For instance, I only wanted an 8 inches deep spice cabinet to allow for greater working room over the counter. My wife and I are pretty serious about cooking from pastries to mains and sides. We want a very serious kitchen. Plus, I'll tall so I needed the room. In any case, if you want something custom your choices online are limited. The big box stores don't really do custom and are just as limited in their options as are the online rta places. Most online rtas offer far cheaply made boxes with construction methods less sturdy. I have found that if I buy cheap, I shouldnt expect my kitchen to hold up past a few years. The finish will fade. The drawers will warp. The joints will open up. The big box stores basically offer the same thing, too. When I go to a big box store to buy something, I do it knowing I probably willl get a year out of it, whether that’s a lawn chair of a power tool. I mean when was the last time you regretting spending too much money on a better grade of power tool? So if you want quality, a better and safer grade building material and much wider choices in sizing then your basically down to three or four options. I went with Arkansas Wood Door and am completely pleased and impressed by the experience. Now I could have spent twice what I did and gone to a small custom shop and gotten the same thing, but I am in to saving money and frankly I enjoy the challenge. AWD worked with me directly. Working up the order and getting the plan for each box just right. If you have never designed and built a kitchen before, there are plenty of tips and guidance on the web and I recommend you heartily research all of the aspects and complications involved. I hit a couple of unexpected bumps. But more about that below. So do your research. For instance you can save a lot of money by building the plinths yourself and only order squared off boxes without the toe kick. By making the platform on which you place the lower cabinets first, you can get that plumb and level, so throwing up the boxes is a breeze. And again, the cabinets are also less expense, a complete all around win. AWD uses an easy system for matching up box parts so assembly was easy. No special tools required. Given the many parts and I used a mix of frameless and face framed cabinets, there was a moment or two when in amongst all the materials I got nervous about having everything I needed, but low and behold, all was right there in the end. I also recommend the concept from French cooking "mis en place" that is have all your ingredients in place and all your tools where you need them before starting out. Also, it was a lot easier to work with my wife than doing it alone, but I did a few by myself and so if that is your only option than you should have no problem. I've assembled a lot of cheaper Swedish flat packed furniture in my day, and the quality and sturdiness of AWD leaves no doubt about how long these will last. Just rock solid. Great thing about AWD is the cost to quality ratio. Cant beat it. Which also means if you make a mistake the replacement is so reasonable it becomes not big deal. I mis-measured one box and so I needed to order the right size. Worked out fine, but that was because AWD had an incredibly fast turn around. The other few reliable companies are several weeks to months. And these other places are crazy expensive. And in truth, the other companies are a complete rip off on trim and accessories. AWD pricing was so amenable that my mistakes cost me so little in comparison with what I was saving. So there's a built in confidence for the first timer. Also AWD made one mistake on the placement of a hinge in two doors. They immediately and without question remade them and sent them out in under ten days. You just can't get that service anywhere in the custom cabinet world. It was so affordable I upgraded on one side to black walnut. Trying doing that at the other quality shops. The quality of the roll out drawers and top drawer boxes is superb and the hinges and under-mount sliders are top grade excellent. The hardware was the easiest part frankly. Their system, for lining up the hardware is just so easy. Drill driver is all you need as the placement is already leveled for you. SO: high end quality custom built cabinets, superior custom support, fastest turnaround in the marketplace, most affordable pricing out there, excellent hardware, and oh yeah, I almost forget, color choices. They offer complete line of lacquer - just pick a SW color and they'll match it. SO completely and truly custom for a fraction of cost without sacrificing any quality. The Rev. Philip Carr-Jones"

"It is a waste of money. The great majority of people are not going to find any value out of the service. If you need design consultation, you need a full service consultation. If you already have knowledge and experience, and you just need to get a few ideas, then you don't need to pay for that. You can just get a magazine or a book since you already have the knowledge of basic designs in your head or a little bit of experience. To have someone call you and give you information over the phone, you are not getting the personal service that you need. You may as well take the money $49 and apply it to something else like getting someone else to come out and give you the service that you need. Because, you are not getting much, you are not getting anything at all. They are going to have you do the work. After talking to them and I was talking to other home designers, I found out that that was a waste of time and waste of money. I gave them a C because they didn't fail at what they do but they don't offer any value for what they do. There's not much value to it. The cost was fair. They didn't do a terrible job and the cost isn't terrible, it was only $49. It just has a very low value. For responsiveness I gave them a B because they will answer your phone and answer your emails."