Get matched with top window and door contractors in Jarratt, VA

Pet-resistant, vinyl-coated polyester is one of the strongest window screen materials available, with some manufacturers touting a 7x increase in strength compared to standard fiberglass screens. Stainless steel security screens are also extremely strong, but they’re not suitable for coastal areas due to the risk of corrosion from salty sea air. If sea air isn’t a concern, stainless steel is extremely tough.

Some local utilities or state programs offer rebates or tax incentives for energy-efficient upgrades, including solar screens. Make sure to check with your local energy provider or government agency to see if you qualify for any cost-saving programs. Federal tax credits may also be available for qualifying window and exterior home upgrades.

Window screen repair costs an average of $310, with a typical range of $100 to $480. The final price depends on several factors, including the window size, accessibility, screen type, whether the frame needs replacement, and especially the screen material.

The cost of window screen materials varies widely based on durability and features:

• Fiberglass: $35–$200

• Aluminum: $50–$300

• Copper: $90–$850

• Stainless Steel: $45–$400

• Brass: $100–$900

• Solar: $55–$850

• Security: $100–$1,000

• Vinyl: $25–$120

Costs also differ by screen type. For instance, a prefabricated screen might cost only $40, moveable screens typically run $25 to $75, and retractable screens range from $300 to $900. To save money, you can choose more affordable materials like vinyl or fiberglass, opt to rescreen instead of replacing the entire frame, and have multiple screens repaired at once to reduce labor costs.

If your door has interchangeable inserts, you’ll likely want to swap the glass out for a screen during the summer months. The process to do so will vary by door, but you’ll follow these general steps: First, use a flathead screwdriver to pop out the retainer strips—the plastic strips running down both long (and sometimes all four) sides of the door. Then gently pull them out by hand. Carefully remove the glass insert from the door and replace it with the screen. Finally, push the plastic retainer strips back into place, working from top to bottom.