Get matched with top masons in Fairfield, VA

Yes, staining a brick home can increase a home’s value, assuming your pro does a good job and you keep up with maintenance tasks. Staining brick is a much better way to increase a home’s value than painting brick, as the latter can cause chipping, warping, and bubbling. Brick stain, on the other hand, gets absorbed by the surface, so it can still breathe. 

Yes, limewash on brick can accumulate dust over time. Its porous nature can attract dust particles, especially in environments with high levels of dust or dirt. Additionally, if the limewash surface is left unsealed, it may be more prone to collecting dust. Additionally, incorrectly applied limewash will generate dust. Causes include applying it too thickly instead of thin layers and not allowing enough drying time between layers. Regular maintenance, such as gentle cleaning or dusting, can help mitigate dusty issues.

You should generally drill into the mortar joints when installing shutters on brick. Mortar is softer, which makes drilling easier and puts less strain on your tools. It also lowers the risk of cracking a brick—something that’s a lot harder to fix. Mortar holds fasteners well enough for standard shutters, and if you ever need to patch the holes later, it’s a much simpler job than dealing with damaged brick. Just keep in mind that if your mortar joints are too thin or the hardware calls for brick anchoring, you'll need to check the manufacturer’s recommendations and adjust accordingly.

Brick spalling—which refers to the crumbly, flaky, or pitted appearance that can develop over time—is caused by a few different conditions. These include:

• Climates with constant freeze-thaw cycles

• Use of non-breathable sealants

• High-pressure water cleaning

• Improper installation

While you can’t do anything about the weather, you can preserve your bricks by cleaning them with soapy water and a good old-fashioned scrubbing. Pressure washers may be satisfying to use, but they can eventually wear away the surface of your bricks. If you don’t have advanced-level DIY skills in masonry, you can hire a reputable masonry contractor in your area for your project.