Top-rated ceramic tile pros.

Get matched with top ceramic tile pros in Check, VA

Enter your zip and get matched with up to 5 pros

Need a pro for your ceramic tile service project in Check, VA?

Select your specific project to find the pro for you.

Find Ceramic tile pros in Check

Mudd Master Drywall & Paint
3.8(
13
)
Tile: Ceramic and Porcelain - InstallTile: Ceramic and Porcelain - Install - For BusinessTile: Ceramic and Porcelain - Repair+1 more

Serving Check, VA and surrounding areas

In business since 2003

Free estimates

"After some initial discussion as to the scope of the work, Mud Masters hung and finished an area of about 200 sq.ft.  The room had a cathedral ceiling and and walls up to 16 ft high.  The work was done in a timely and professional manner. They returned at least twice to insure that the walls were finished correctly.  The job was more difficult than normal due to some of the walls having framing issues.  They took the time to assure that the finish work was done to our satisfaction.  They cleaned up every day after the work was finished.  We would definitely use them again.
"
Recommended by80%of homeowners
...
Showing 1-10 of 53
Ceramic Tile questions, answered by experts

When choosing between porcelain and ceramic tile, the best option depends on your specific needs, budget, and project application. Porcelain tile is generally more durable, denser, and harder than ceramic, making it a good choice for busy, high-traffic areas. It also offers superior moisture resistance, making it ideal for moisture-retaining spaces. However, porcelain is typically more expensive, and its hardness can make it brittle, potentially causing it to crack if a heavy object is dropped on it. In contrast, ceramic tile is a more budget-friendly option with lower material and installation costs. It is softer and easier to work with, making it a great choice for DIY projects. While not as durable as porcelain, ceramic is still a quality material suitable for many home applications, particularly small, decorative projects.

The rule tells you how to cut tile to install it in a corner. The 3/4/5 rule recommends that you should have 3 feet across on one straight line, four feet on the other perpendicular line, and 5 feet of length from the end of one of the lines to the other. You’re making a right triangle with the tile, and the hypotenuse (the line across from where the 3-foot lie and 4-foot line meet) should be 5 feet long.

If the hearth ends against a wall, you can use a tile cutter as you normally would. However, if the edge of your hearth ends with no surface pressing against it,you may want to look into rounded tiles. These give a smooth edge to your hearth and make sure cut edges aren’t visible. You can also see if the tile you have has pieces that have been glazed or rounded on one edge. You’d then cut the tile and place it normally, with the cut edge facing inward. 

Thinset mortar is the best adhesive for ceramic tiles on concrete. It is easy to work with and has a slower dry time than mastic or epoxy mortars. This longer dry time gives the installer more time to adjust tiles, which is especially useful for DIYers who may not have tile installation experience. It can also be built up to help level any depressions or gaps in the concrete subfloor.

Yes, you can tile over existing tiles in a bathroom, but it is not always recommended. For this method to be successful, the original tile surface must be clean, flat, and free of damage such as cracks, unevenness, mold, or mildew. While tiling over existing tiles can save time and money, there are potential drawbacks. The new adhesive may not bond properly, and the process adds extra weight to the wall or floor. Additionally, the increased height of the surface could interfere with door clearances. For the best and most durable results, removing the old tiles before installing new ones is generally the better option.

The Check, VA homeowners’ guide to ceramic tile services

From average costs to expert advice, get all the answers you need to get your job done.