Get matched with top locksmiths in Charles City, VA

Whether or not keyless door locks are safe and trustworthy depends on the visibility of the programming code—and a trespasser’s determination. Even if you carefully guard entry and programming codes, those trying to break in may be able to crack open the lock’s faceplate with a screwdriver and change the codes. The same goes for manual models.

Some find smart locks the safest option because it’s harder to manipulate codes without access to your phone. But it’s possible to get hacked even then. Consider installing an extended security system, like door and window alarms or surveillance cameras, to enhance security. 

There are many types of deadbolts, but these tips work on most. First, address any grime buildup. A bit of WD-40 will loose up rust and dirt so the deadbolt can turn. Inspect the door and frame alignment if this doesn't resolve the issue. Adjust the strike plate or the deadbolt's position to improve alignment. If the problem persists, disassemble the lock to inspect for damaged or worn parts. If you are unsure how to do it, hire a local locksmith.

Rekeying is typically cheaper than replacing locks. Professional rekeying costs between $40 and $160, sometimes with an additional fee of $15 to $40 per lock. A locksmith's hourly rate averages around $75. If you do it yourself, a rekeying kit can cost as little as $10. In contrast, replacing a lock costs between $130 and $500, with an average of around $315, depending on the hardware and lock type. Rekeying is a simpler process that changes the key for your existing lock without replacing the hardware. It is a good option if you have a quality lock that works well, you've recently moved, you've lost a key, or you need a quick security upgrade. The best choice depends on the condition of your current locks.

When the temps drop, sometimes you need to thaw a lock to regain access. Options include warming the key with warm water, applying a de-icing spray, or using a hair dryer on low heat. Avoid using boiling water to prevent damage. To prevent future freezing, consider installing a cover or shield over the lock to keep water and ice out. Remember to be patient and gentle during thawing to avoid damaging the lock or key. If all else fails, consult a professional locksmith.