Top-rated chimney inspectors.

Get matched with top chimney inspectors in Wendover, UT

Enter your zip and get matched with up to 5 pros

Need a pro for your chimney inspection project in Wendover, UT?

Select your specific project to find the pro for you.

Find Chimney inspectors in Wendover

Avatar for Frontpoint
Frontpoint
4.7(
8,819
)
Chimney or Fireplace - Clean and InspectChimney or Fireplace - Clean and Inspect - For BusinessClean and Inspect a wood fireplace chimney+1 more

Serving Wendover, UT and surrounding areas

In business since 2007

Free estimates

Emergency services offered

"It's a pretty decent system, I think. They send you the pieces and you install them yourself, which is pretty easy. The only real problem I have is that one sensor is too far away from the panel...or there's some interference, and they haven't been able to fix that. It's an interior door, so it's not the end of the world, just a little annoying. Their customer service is pretty good though. Nice, smart customer service people on the other end, very polite and helpful."
Recommended by93%of homeowners
Chimney Inspection questions, answered by experts

Inspections should be conducted annually, and minor repairs should be made as needed.

If you don’t see obvious signs of roof leaks, like water spots on the ceilings inside or visible damage to the roof membrane, the best way to check for leaks is to have a professional complete a heat scan of your roof. This will identify areas where water has penetrated the membrane and is keeping the roof cooler in certain areas.

If you see rust spots or streaks or any physical damage to the chimney cap from the ground, you should hire a professional to inspect and replace it. If it’s safe to get up on your roof or near your chimney cap with a ladder, you can perform a closer inspection to identify issues. Additionally, if you know your chimney cap is nearing the end of its life—usually five to ten years—or you’re seeing evidence of water damage or pest infestation in your chimney, it’s a good idea to replace the cap.

A standard roof can hold a live load of about 20 pounds per square foot. However, gable roofs often have steeper-than-average slopes, so calculating their weight capacity can be challenging. If the slope of your gable roof is greater than 4:12, the live load needs to be decreased to allow for a larger dead load. Ask your roofer exactly how much weight your roof can support.

EPDM roofs have a few common problems, most of which can be resolved with regular maintenance. This type of roofing is laid down in sheets with seams, which can be a starting point for leaks. Proper installation and roof sealing can often avoid seam issues. 

The material is also susceptible to tears and punctures from falling branches or other sharp objects. There are black and white versions of EPDM, and the black version is more prone to fade and succumb to UV damage. Regular roof inspections can protect the costs of rubber roof installation and extend the life of your roof.

The Wendover, UT homeowners’ guide to chimney inspection services

From average costs to expert advice, get all the answers you need to get your job done.