Get matched with top fencing pros in Wellington, UT

The average cost to install a fence that is 200 feet in length is $4,600, but this largely depends on the type of fence you build. For instance, a 200-linear-foot redwood fence costs between $3,600 and $7,000.

A silt fence should be buried in a trench that is 6 to 12 inches deep. A depth of at least 6 to 8 inches is necessary to prevent water and sediment from running underneath the fence. A deeper trench, up to 12 inches, provides better anchoring during wet and windy weather. To ensure proper installation, look for a red line on the silt fence fabric, which often indicates the correct burial depth. Always adhere to local guidelines and regulations; a professional contractor will be familiar with these requirements.

Removing fence posts that are set in concrete is something you can't do by hand. You will need an excavator, a strong post-puller, or a jackhammer. If you plan on recycling the concrete base, you may be able to cut the post out with a jackhammer and then set the new post in the existing base. However, it's usually better to remove both the fence post and concrete together. Due to the weight of concrete, you will need a hydraulic removal tool.

It is almost always necessary to hire a land surveyor near you to ensure your fence sits on the right side of the property line. Mistaking the shape of your property can lead to fines and costly changes if you have to move or adjust the privacy fence—not to mention some surly looks from your neighbor. We recommend jumpstarting your fence planning in the spring to ensure there is plenty of time to map out your plan before construction season.