Get matched with top fencing pros in East Carbon, UT

A silt fence should be buried in a trench that is 6 to 12 inches deep. A depth of at least 6 to 8 inches is necessary to prevent water and sediment from running underneath the fence. A deeper trench, up to 12 inches, provides better anchoring during wet and windy weather. To ensure proper installation, look for a red line on the silt fence fabric, which often indicates the correct burial depth. Always adhere to local guidelines and regulations; a professional contractor will be familiar with these requirements.

All fences offer some degree of privacy, but standard perimeter fences may not be designed with that in mind. Dedicated privacy fences, however, tend to enclose smaller areas and feature more high-end materials that truly emphasize seclusion and comfort. Additionally, privacy fences typically offer fewer gaps to peek in through than standard fences, though you can likely adjust that to suit your preferences. 

Check with your local laws, which might state that you have to build a fence around your plunge pool. If you have children or pets or live in an area with abundant wildlife, you should consider building a fence around your pool for safety. Pools can present a drowning hazard, and while plunge pools are not very deep, younger children can get hurt if they try to dive into them. A fence can help protect your family and visitors from injury.

In most cases, you will need a building permit to put up a vinyl fence, especially if the fence is sitting on or close to your property line. You can ask your local building department or  fence installation company if your fence project will require a permit. If so, you can expect it to cost between $20 and $60. Your fence installer should pull the permit for you. Building without a permit could eventually require you to pay again to remove the fence and reinstall it after getting the job approved.