Get matched with top ceramic tile pros in Snyderville, UT

If you hire a professional to lay tile, you can expect to pay $3 to $15 per square foot for labor. For a 100-square-foot tiling project, that would equal $30 to $150 in labor. These costs may increase if you need extra services (such as tile removal, wall repair, or waterproofing). For example, tile removal costs an additional $2 to $7 per square foot.

The average cost for tile installation is about $2,000, with a typical price range between $500 and $6,500. On a per-square-foot basis, you can expect to pay between $5 and $45 for installation.

Several factors influence the total cost, including:

• Installation Site: Costs vary for different areas. Common project costs are: kitchen floor ($870–$6,100), countertop or backsplash ($500–$3,000), bathroom floor ($300–$2,400), or shower wall ($225–$2,000).

• Tile Type and Quality: The material significantly impacts price. For example, standard ceramic or travertine tile can cost about $1 per square foot, while luxury options like marble can be as much as $350 per square foot for the material alone.

• Project Size and Complexity: The total square footage, the complexity of the pattern, and the shape of the tile (e.g., square, rectangle, hexagon, mosaic) will affect labor and material costs.

• Site Preparation: The amount of prep work needed, such as removing old tile or installing a new subfloor or backer board, can add to the final price.

• Tile Characteristics: The tile's durability rating and porosity can also influence the price.

• Location: Labor rates vary by geographic location.

Like glass tiles, you will not need to seal most porcelain tiles, particularly if the porcelain is already glazed. It depends on quality. Porcelain is very water resistant, but it is not 100% waterproof. To avoid staining, some homeowners use a penetrating sealer. It is also a good idea to seal your grout. Unless you use epoxy grout, grout is very porous and can harbor bacteria, mold, and mildew.

Tile shouldn’t be set tight against the tub. Bathtubs can expand when filled, and they can shift slightly with the weight of occupants. For this reason, it’s important to leave a slight gap between the bathtub and the first row of tile. Aim for a narrow gap of approximately 1/16 of an inch, filled with caulk, to allow for this expansion and movement while still allowing for tile shower waterproofing.