Best marble restoration pros near Fillmore, UT

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.

Silestone® is a low-maintenance countertop material, but certain things, like strong chemicals and solvents, can cause damage. Abrasive scrubs can cause scratches, and products that contain oil or powder can leave a residue. Finally, avoid letting oven cleaner come into contact with Silestone® because it can cause discoloration.

Extensive chips and cracks may require a full replacement of the countertop. The cost to install a new countertop is around $3,100 on average. But, if the damaged area is relatively small, you may want to consider repairing it yourself or calling in a qualified professional. Depending on the material, some epoxy and sandpaper may do the trick. Or you can consider painting laminate countertops or refinishing butcher block countertops.

Engineered stone doesn’t need sealing because it is non-porous. The manufacturing process creates a natural stain resistant to moisture, which also makes it easy to clean.