Get matched with top locksmiths in Cedar City, UT

Locksmiths recommend changing your locks once every seven years for the best security at your home. Locks can wear out over time, so you should inspect your locks regularly. A higher grade lock provides you with more cycles than those with a lower grade.

When the temps drop, sometimes you need to thaw a lock to regain access. Options include warming the key with warm water, applying a de-icing spray, or using a hair dryer on low heat. Avoid using boiling water to prevent damage. To prevent future freezing, consider installing a cover or shield over the lock to keep water and ice out. Remember to be patient and gentle during thawing to avoid damaging the lock or key. If all else fails, consult a professional locksmith.

The easiest way to pick a lock is by using a titanium rake pick. This type of lock pick comes in a variety of shapes used to simulate different key configurations but generally has a tip with a bent design. Rake picks are the most beginner-friendly lockpicks and the simplest to learn how to use.

Yes, as long as it’s thick enough for the deadbolt. Most interior hollow core doors are at least 1 1/2-inches thick, which is usually the minimum requirement for a deadbolt. You’ll want to find the lock block first before installing. Also, most hollow doors require additional reinforcement for locks, such as a reinforcement plate or plywood block.