Get matched with top locksmiths in Panaca, NV

You may be able to get a broken key out of a lock by yourself, depending on the situation. If a portion of the key is still protruding from your lock, try lubricating the keyway and using pliers or even a bobby pin to pull the key out of the hole. If you have jigsaw blades handy, you can also try using those to grab onto the stuck key and pull it out. 

But, if neither option works or you can’t reach the key, your only option is to call a locksmith for help. 

There are different types of deadbolts. The most common type is a single-cylinder deadbolt, which you may recognize on your front door. This type of lock has a keyhole on the outside and a thumb turn on the inside. A double-cylinder deadbolt has two locking mechanisms and requires a key to engage on the inside as well as the outside. 

Lock bumping is a technique locksmiths use to quickly and quietly open a pin tumbler lock, typically found in most types of deadbolts. It involves inserting a specially crafted key, or bump key, into the lock and tapping or "bumping" it with a mallet or similar tool. The force applied causes the lock's pins to jump momentarily, allowing the lock to be turned and opened. Unfortunately, thieves also use this technique to break into homes. Luckily, products like a deadbolt strap will fortify your lock.

The best type of deadbolt depends on your specific needs. If accessibility is your primary concern, a single-cylinder deadbolt is the easiest to operate. Mortise locks are likely the most secure type of deadbolt you can install, but single-cylinders combined with secondary locking mechanisms like vertical locks are also a great option. Smart locks will give you the most flexibility to open and close your locks whenever and wherever you need to.