Get matched with top plumbing handymen in Cache Junction, UT

Yes, shower water goes into the septic tank. Shower water is a type of greywater, and in fact, all water used in a home with a septic system—including water from sinks, toilets, the dishwasher, and the washing machine—drains into the tank. When shower water enters the tank, debris like soap and hair travels with it. The solid debris sinks to the bottom to become sludge, while soap residue joins the scum layer at the top. The remaining water is treated in the tank before moving to the drain field for further treatment and dispersal. It is important to avoid putting oil or harsh chemicals down any drain, as they can cause clogs or disrupt the beneficial bacteria required for proper wastewater management in the septic system.

If you don’t want to remove the sink stopper, pour ½ cup of baking soda and 2 cups of boiling water down the drain. Start by pouring 1 cup of boiling water, then the baking soda, followed by the remaining cup of boiling water. Use caution as boiling water can damage PVC or other plastic piping. Using a scrub brush or slightly abrasive sponge, clean the top of the stopper, and run the faucet to ensure the drain is clear and the stopper is clean. 

If you're connecting your gas line to appliances, the pro doing the work may recommend flexible corrugated stainless-steel tubing (CCST). Polyvinyl chloride (PVC) with high-density polyethylene (HDPE) is another relatively inexpensive material commonly used for residential pipes. Ultimately, you'll need to find out what is permitted based on the code requirements in your area.

Pipes in your house can freeze after six hours or so if you lose power and temperatures are below freezing. You can prepare for potential power outages by winterizing your pipes with insulation. Also, whenever temperatures drop below 20 degrees Fahrenheit, turn your faucets on very low and leave them dripping until temperatures rise.