Top-rated exterior painters.

Best exterior painters near Cache Junction, UT

Enter your zip and get matched with up to 5 pros

Need a pro for your exterior painting project in Cache Junction, UT?

Select your specific project to find the pro for you.

Top-Rated Exterior painters in Cache Junction - Updated Nov 2026

Avatar for Painter1 of North Central Utah
Painter1 of North Central Utah
3.8(
5
)
Exterior Home or Structure - Paint or Stain: LargeExterior Home or Structure - Paint or Stain: Medium

Serving Cache Junction, UT and surrounding areas

Approved

In business since 2014

Free estimates

Credit card accepted

"Overall, the final result was an excellent paint job that we are very happy with. Along the way, we had some difficulties. Painter 1 is a franchise that subcontracts with independent painters to do the work. Unfortunately, the painters contracted to do our job were less than adequate. Fortunately, Painter 1 stood by their guarantee and made sure the work was done right. They even went above and beyond. So while initially, we were not happy with the work, they were very professional, listened to our complaints and concerns, and took care of correcting the issue in a very timely manner."
My jobs
My jobs
My jobs
My jobs
My jobs

+7

4 neighbors recently requested a quote
Recommended by75%of homeowners
Showing 1-10 of 33
Exterior Painting FAQs, answered by experts

Yes, you can pressure wash epoxy floors, but you must take precautions to avoid damaging the surface. While most epoxy floors can be cleaned with a mop, you might choose to pressure wash if the floor is stained, has ground-in dirt, or is covered with mold or mildew. To do so safely, first soak any stains or dirty areas with a gentle cleanser. Use a lower pressure setting with a gentle nozzle, such as a green, white, or black tip, or a 45-degree angled tip. Keep the spray nozzle at least 18 inches away from the floor to protect the surface. Using a surface cleaner attachment or a rotary scrubber can also help prevent overspray. Be cautious if using a power washer that heats the water, as the combination of heat and pressure may be too powerful and could damage the epoxy coating.

Pressure washing is the best way to remove paint that’s already peeling from certain types of vinyl and aluminum siding and some masonry. However, if the paint is largely intact and not yet peeling, or if your siding material can’t withstand the pressure, you may need to use other methods, such as chemical paint strippers, a heat gun, a paint scraper, or sanding.

WD-40 is an effective way to remove glue and other sticky residue from many surfaces, including wood. Spray the WD-40 on the area, allow the product to sit for a few minutes, then carefully wipe away the residue. As with other adhesive removal methods, test the WD-40 on an inconspicuous spot first to ensure it won’t damage the finish. 

Professional lead-paint abatement companies use a variety of methods to remove lead-based paint, depending on each particular situation. Some of the most common methods include:

  • Total removal: $8–$17 per square foot

  • Demolition and replacement: $1,000–$15,000 per project

  • Encapsulation: $4 per square foot

  • Enclosure: $10 per square foot

  • Chemical stripping: $10–$17 per square foot

To fix bubbling paint, scrape away any loose or blistered areas using a putty knife. Lightly sand the surface to smooth out rough edges and create a level finish. Clean the area thoroughly to remove dust, dirt, and any residue. Once the surface is clean and dry, apply a quality primer suited to the material you're painting. Finally, repaint the area, making sure to work in proper temperature and humidity conditions to prevent new bubbles from forming.

The Cache Junction, UT homeowners’ guide to exterior painting services

From average costs to expert advice, get all the answers you need to get your job done.