Best electricians near Lumberton, TX

Just as fluorescent lights are more efficient than incandescent lights, LED lights are more efficient to run than fluorescent lights. The specifics will vary from product to product, but LED lights are typically twice as efficient as equivalent fluorescent lights. A 13-watt CFL bulb can replace a 60-watt incandescent bulb, but a 6- to 8-watt LED bulb can offer the same amount of brightness. Fluorescent lights offer about 50 lumens per watt, while LEDs offer about 100 lumens per watt. LED light bulbs typically last two to three times as long as CFL bulbs, too. 

Yes, a faulty or broken light switch can be a serious fire hazard. Malfunctioning switches, often due to loose connections, exposed wiring, or overheating, can cause sparking or arcing. If you hear a crackling, popping, or hissing sound when you use the switch, it indicates live electricity arcing inside, which is a significant hazard that can ignite nearby flammable materials. If you suspect your light switch is faulty, turn off the power to that circuit at the breaker and contact a qualified electrician to remedy the issue.

It’s important to ask an electrician a few questions before you commit to hiring them so you can make an informed decision as a consumer. If you’re getting estimates or considering hiring an electrician, ask them these questions:

• Are you a full-time electrician?

• Are you bonded, licensed, and insured?

• What level of experience do you have as an electrician?

• Can you please share three references?

• Do you do residential or commercial electrical work?

• What kinds of electrical work are you most familiar with?

• Will any subcontractors be performing the work?

• Are permits and inspections required?

• Who is responsible for obtaining permits and inspections?

• What is your schedule?

• Do you offer a guarantee or warranty on your work?

• Will you sign a do-not-exceed clause to keep the job within the budget?

A GFCI outlet is easy to identify. It features two buttons on the face that read “TEST” and “RESET.” Sometimes, the “RESET” button is red. These are positioned in the center of the two three-prong plug-in slots you see on a regular outlet. Some also feature a green light to indicate when the outlet is working, changing to red when there is a problem.