Get matched with top deck cleaning pros in Lorena, TX

PVC decking tends to be cooler than composite because the material is less dense and absorbs less heat. However, it depends on the deck’s color. A dark-colored PVC deck may run hotter than a light-colored composite deck. If you’re concerned about your deck getting too hot, it’s best to stick to a light color such as beige or gray.

While eco-friendly decking, also called composite decking, is a win for the environment because it consists of recycled materials, it has trade-offs. These sustainable options often come with steeper price tags, lack natural wood's warm look, and can become uncomfortably hot under full sun. Some composite materials can also become slick when wet, posing a potential hazard.

Yes, it is possible to build a small, basic deck for $5,000, particularly if you use less expensive materials and a simple design. To stay within this budget, consider a size under 10x12 feet and use affordable materials like pressure-treated wood or cedar. While the general cost for deck building ranges from $4,350 to $12,560, with an average around $8,200, some projects can be completed for as little as $4,350. You can also save on labor costs by doing the work yourself, but be aware that mistakes could end up costing more than hiring a professional. A contractor may have a higher upfront cost, but they can ensure a safe, stable deck that will last.

Most building codes require that spindles or balusters on deck and stair railings be spaced no more than four inches apart. This safety standard, often called the '4-inch sphere rule,' is designed to prevent small children or pets from slipping through the railing. A good way to visualize this is that a 4-inch sphere should not be able to pass between two spindles. For the same safety reason, the space between the bottom rail and the deck floor should also be no more than four inches. As a general guideline, professionals often install three balusters per foot of railing. However, since specific requirements can vary by location, it is crucial to check your local building codes to ensure compliance before starting your project.