Get matched with top plaster repair specialists in Jasper, TX

Plaster repair costs range from $4 to $10 per square foot for refinishing, while skim coating can be less expensive, usually between $2 and $5 per square foot. The price you pay for plaster repairs will depend on the extent of the damage, the type of plaster you have on your walls, and the accessibility of the damage. Plaster repair on the exterior of your home tends to be more expensive, as there’s a higher chance that ladders or scaffolding will be necessary to carry out the repair.

Depending on the quality of the plaster and the moisture in the building, plaster can last over 100 years in some cases. It may develop cracks in some places, but many find it aesthetically appealing. As long as no structural damage affects the plaster and maintenance is being performed—mainly repairing small patches and addressing water damage—plaster can last a long time.

Smaller is better when patching holes with spackle. Any holes wider than four to six inches in diameter tend to be too wide to repair with spackle alone. You'll likely want to patch bigger holes with a drywall panel. 

Even holes measuring up to 6 inches may be challenging to fill with spackle alone. For best results, purchase a wall repair patch made from wire mesh. Cut the patch to fit over the hole, then use the spackle to hold it in place. Apply the spackle over the patch as you would for a smaller hole.

Drying alone can take 1 to 4 hours to dry to the touch per plaster layer, but some types of plaster take several hours longer to dry. However, this doesn’t mean the job is done because plaster doesn’t fully harden until it cures, which can take a few days to a couple of weeks. It may take even longer if you’re building a new, pretty thick plaster wall. Allow the plaster to cure before painting it.