Get matched with top water heater pros in Jarrell, TX

If you want instant hot water and to reduce water waste while improving convenience, a hot water recirculating system is worth it, especially if you find your hot water heater is not hot enough. These systems can save thousands of gallons of water each year so you don't have to wait for hot water at faucets and showers. The upfront investment can be high, especially for systems requiring additional plumbing, but the long-term savings on water bills and added comfort make them a worthwhile upgrade.

Most standard residential water heaters, which are typically around 40 gallons and use 240 volts and between 3,500 and 5,500 watts, require a 30-amp, two-pole circuit breaker. For smaller, point-of-use water heaters using 120 volts and between 1,500 and 3,000 watts, a 30-amp breaker is also often adequate. However, some models may have different needs; units that use more watts than average may require a 40-amp breaker, while smaller units might only need a 20-amp breaker. Newer, tankless, or more energy-efficient models can also require a higher amperage. Having the correct breaker size is crucial for safe and efficient operation, so it's best to consult a licensed electrician to determine the specific needs of your water heater.

When the water expands in a hot water heater, it puts pressure on your hot water pipes and can cause leaks or a rupture in the hot water tank under certain conditions. Pipes or water heaters may split due to the pressure where there is a backflow preventer that prevents the hot water heater from diffusing pressure by releasing water back to the public water line.

In these scenarios, a hot water heater expansion tank provides a place for the hot water heater to relieve pressure and prevent bursts and leaks.

While possible, professional assistance is recommended to ensure compliance with local regulations and avoidance of avoidable risks.