The plumbers (I believe the lead guy was Chad) were supposed to be there between 8-830 a.m., but didn't arrive until about 8:45 and apologized for their lateness. I showed them what I wanted done and they started working right away. About five minutes in, the lead plumber came out and said the supply lines had been welded to the old faucets. He'd need to cut them and replace the lines. I said fine. About 10 minutes later, they came out and said the shut-off valves were not working and they'd have to turn the water off to the house then replace those valves. I was getting a bit skeptical, but this far in, couldn't stop the work. The had everything done in about 90 minutes and the bill was approximately $370. I thought it was was going to be more like $150 until those other issues arose. A friend who does a lot of remodel work says the charges were outlandish... that they were in-line with what he would expect. I also appreciated the fact they asked for towels to make sure no water spilled anywhere and completely cleaned up the work area. "},"url":"https://www.angi.com/companylist/us/tx/flower-mound/absolute-plumbing-of-flower-mound-reviews-2284488.htm"},"position":9},{"@type":"ListItem","item":{"@type":"LocalBusiness","name":"Martin Electrical Systems","address":{"@type":"PostalAddress","addressRegion":"TX","addressCountry":"US"},"review":{"@type":"Review","author":{"@type":"Person","name":"Bob M."},"reviewBody":"I have lived most of my life in dread of dealing with and being monetarily taken advantage from all types of Service vendors, whether it be Auto, Plumbing, Electrical, or etc. etc., only because it has and does routinely happen. Well now that I have found Garrett Martin and his Team Member Daniel, at Martin Electrical Systems, I can scratch at least one vendor off my "Cautionary List" for good. From the very first phone call, Garrett was both a consummate Professional and personable individual that showed the true importance of customer service over mass advertising and fast talk. It all started when I had a couple of outside electrical boxes that had blown out that needed replaced which they not only did but replaced with high grade professional boxes versus the plastic cover type which had blown two times before from weed eaters, dogs, and such. High quality work and the price was extremely reasonable! Now I have boxes I no longer have to worry about anything happening to again. My Service Technician was Daniel, and just a really nice young man, very polite, courteous and knowledgeable - that was also a confusing first for me! It was when Daniel went to turn off the breakers inside our house, that he mentioned, what I have known for years, was an out of date and dangerous, breaker box that was installed in mass in these type of tract homes throughout I believe DFW and the US back in the 80's. The boxes were known for the breakers not to throw and Daniel said that in Electrical parlance and slang, they referred to them as "Welders Boxes" because they would Arc before they would trip. Plus, the individual breakers were hard to find, expensive if you did and would not work anyway. We moved here into our "starter" home as we called it as young couple at the time, but have lived here and raised 3 boys with no signs of ever moving and that it fine with us. And yes I have known for years, as brought to my attention by other Electricians, that this box had to be replaced, but the only problem was of course the price. These panels are extremely expensive and time consuming to replace and have had quotes from many other vendors over the years of $3500 to over $5000!! The $5000 came from a vendor whose commercials and jingles play relentlessly on the TV, but its obvious to me now, this sort of advertising and marketing are just passed on to us. Anyway, Garrett did the whole thing at a very reasonable price that I could afford. Daniel showed up for his 8:00 appointment at 7:57 and left ahead of schedule! We all sleep a little better these days. I do not give out reviews lightly, but I 200% recommend Martin Electrical. I have several more things down the road I want them to do, bathroom fans need replacing and other things and I will just give Garrett a call and proceed without question to his quality/price of work! Thanks Garrett and Daniel again! "},"url":"https://www.angi.com/companylist/us/tx/argyle/martin-electrical-systems-reviews-7504016.htm"},"position":10}]}
Welding reviews from real Angi homeowners in Highland Village, TX
Needed a gate repaired that was sagging a lot. Victor and Jonathan were super responsive and offered up an alternative idea to what I had in mind -- their idea will work better long term and keep me from having to get the gate redone when it inevitably sags again.
They even went so far...
Excellent. He did have to come back a couple days later because all of a sudden the a/c unit quit cooling. He came within an hour if my call and found the problem (a tiny pin ***** hole in a weld), it was fixed and freon replaced with no cost.
Scott S.
5.0
04/2014
Called Absolute to install two new bathroom faucets. The woman who took my call was very nice and very upfront: she said they were extremely busy and the earliest she could schedule an appointment was in about a week. I was OK with that and booked. The plumbers (I believe the lead guy was...
Bob M.
5.0
08/2013
I have lived most of my life in dread of dealing with and being monetarily taken advantage from all types of Service vendors, whether it be Auto, Plumbing, Electrical, or etc. etc., only because it has and does routinely happen. Well now that I have found Garrett Martin and his Team Member...
T-Rex Concrete & Welding serves its customers with pride, integrity and attention to the details that matter most to you. We can do small or large jobs, with over 20 years in the Concrete business as well as Metal Fence installation. Please give us a call or click for an estimate today! Thank you for the opportunity to serve you.
"They did a great job! Looks exactly like the railing we have them ☺️"
Pat G on May 2025
T-Rex Concrete & Welding serves its customers with pride, integrity and attention to the details that matter most to you. We can do small or large jobs, with over 20 years in the Concrete business as well as Metal Fence installation. Please give us a call or click for an estimate today! Thank you for the opportunity to serve you.
"They did a great job! Looks exactly like the railing we have them ☺️"
Here at Imperial I take pride in all forms of work from smaller repairs such as fence or bracken hinges to structures such as carports. All of my work is treated the same with attention to detail and longevity in mind for the customer. I 100% stand behind my product.
Here at Imperial I take pride in all forms of work from smaller repairs such as fence or bracken hinges to structures such as carports. All of my work is treated the same with attention to detail and longevity in mind for the customer. I 100% stand behind my product.
Look, you need concrete or welding? We’ve got you covered. We pour concrete—footings, slabs, driveways, patios, walls—doesn’t matter. We also offer mobile welding services, bringing our top-notch welding equipment to your site for repairs, custom builds, or heavy-duty fixes. We show up, we get it done right, and we get it done fast. No messing around. We use the good stuff—premium concrete mix that won’t crack in a year and high-quality welds that hold strong. You want it to last? You call us. Plain and simple. Licensed, insured, and we clean up after ourselves. Give us a shout.
Look, you need concrete or welding? We’ve got you covered. We pour concrete—footings, slabs, driveways, patios, walls—doesn’t matter. We also offer mobile welding services, bringing our top-notch welding equipment to your site for repairs, custom builds, or heavy-duty fixes. We show up, we get it done right, and we get it done fast. No messing around. We use the good stuff—premium concrete mix that won’t crack in a year and high-quality welds that hold strong. You want it to last? You call us. Plain and simple. Licensed, insured, and we clean up after ourselves. Give us a shout.
We are a Veteran owned and operated fabrication company that values honesty and integrity and treats your home as if it were our own. We offer a variety of general contractor services in welding and fabrication, that are customizable to each individual project. You will find us to be competitively priced, paying close attention to the details of each and every project that we are involved with. We look forward to building lasting relationships and guarantee your satisfaction!
We are a Veteran owned and operated fabrication company that values honesty and integrity and treats your home as if it were our own. We offer a variety of general contractor services in welding and fabrication, that are customizable to each individual project. You will find us to be competitively priced, paying close attention to the details of each and every project that we are involved with. We look forward to building lasting relationships and guarantee your satisfaction!
We guarantee your satisfaction, and we won’t leave until the job is done right. Our team has quality experience in this industry, and we make sure our customers are happy before we leave. Call or click to schedule an estimate today!
We guarantee your satisfaction, and we won’t leave until the job is done right. Our team has quality experience in this industry, and we make sure our customers are happy before we leave. Call or click to schedule an estimate today!
Manskey Manufacturing will handle all of your home welding, carpentry and design needs. From fences and gates, to outdoor patios and kitchens to elaborate one of a kind outdoor living spaces. One stop shop for all your outdoor living needs.
Manskey Manufacturing will handle all of your home welding, carpentry and design needs. From fences and gates, to outdoor patios and kitchens to elaborate one of a kind outdoor living spaces. One stop shop for all your outdoor living needs.
Any outdoors work that you may need help with or done well be right on it with a great price for you we take pride in our work to come satisfy you with all your needs that need to be done thank you - Angel Gonzalez owner-operator of AG Outdoors Property Services
Any outdoors work that you may need help with or done well be right on it with a great price for you we take pride in our work to come satisfy you with all your needs that need to be done thank you - Angel Gonzalez owner-operator of AG Outdoors Property Services
We specialize in anything metal working, from fabrication to following a simple blueprint. We are also mobile making it easy for us to do work on the road. Our prices are unbeatable and the work is fast. We are a small company of 2 just trying to build an empire and can make anything a person can imagine, come to life.
We specialize in anything metal working, from fabrication to following a simple blueprint. We are also mobile making it easy for us to do work on the road. Our prices are unbeatable and the work is fast. We are a small company of 2 just trying to build an empire and can make anything a person can imagine, come to life.
...
Showing 1-10 of 204
Welding questions, answered by experts
Professional metal fabricators usually charge around $70 per hour. Three of the largest cost factors are the size and complexity of the project and the price of materials. The type of metal can impact the cost as much as the intricacy of the metal fabrication you want done. Another cost factor is your geographic location, as labor and materials can vary widely depending on the cost of living where you live.
A steel beam is stronger than a wood beam and requires fewer vertical supports underneath, which means it’s a better option for larger structures or if you want an open space under your home that doesn’t have posts as obstructions. However, steel I-beams cost more than wood ones, and they can be difficult to install retroactively, as getting them into the basement area can be challenging, if not impossible.
Costs depend on material type, labor, design complexity, finishing requirements, and installation needs.
Custom metalwork offers durability, design flexibility, and unique aesthetics tailored to specific needs.
Yes, an LVL beam is more affordable than the cost of a steel I-beam, totaling between $50 and $200 per linear foot as opposed to the $100 to $400 per linear foot you’d pay for a steel I-beam. Not only is the wood material more affordable than steel, but it’s also more similar to traditional wooden beams and doesn’t require as much retrofitting to connect joists.
By submitting this question, I acknowledge and agree that Angi may publicly display my name, city, state, and question on the website for professionals and others to see.
The Highland Village, TX homeowners’ guide to welding services
From average costs to expert advice, get all the answers you need to get your job done.