Get matched with top asphalt driveway pros in Cotulla, TX

Gravel is the least expensive driveway type, costing between $1 and $3 per square foot. That said, you’ll likely need to add new gravel filling once or twice a year which can add up in additional costs over time. In addition, be prepared to regularly rake the gravel into place to keep your gravel driveway looking its best.

The answer to whether or not you need to get a permit before you start your driveway can vary widely based on local ordinances and the scope of your driveway ideas. In most urban and suburban areas, a permit is needed before building a new driveway to ensure that a homeowner is using safe materials and proper drainage practices while designing and constructing a new driveway. In some rural areas, a homeowner may not be required to apply for a permit. When building a new driveway on your own, always check with your local building department to see if you need to request a permit. When hiring a driveway contractor, verify that the right permits are being used before driveway construction begins.

An asphalt driveway should be at least 3 inches thick over a compacted gravel base. Areas with poor drainage should have a thicker stone base. To install a new asphalt driveway over an existing driveway, the new asphalt should be at least 2 inches thick and the existing driveway should be in relatively good condition.

Yes, asphalt is less expensive than concrete. Asphalt prices range between $7 and $15 per square foot, whereas concrete costs $3 to $18 per square foot. When considering asphalt versus concrete driveways, you’ll want to weigh more than just the costs. While concrete costs more, it costs less to maintain. On the other hand, asphalt has the advantages of a quick installation and shorter drying time.