Get matched with top septic tank pros in Bronte, TX

Most home wells start at 100 feet, and many go as deep as 200 or 300 feet. 

It takes quite a lot of water to meet the demands of showers, toilets, faucets, and appliances like dishwashers and laundry machines, and shallow wells struggle to provide this amount quickly. If you anticipate having high water usage in the future, it’s often better to drill slightly deeper and give yourself a bit more water storage than you need.

How do you set your well’s pressure tank? All you need to do is first drain the tank of water and find the pressure switch. Remove the switch cover and adjust the switch with a wrench—clockwise to increase water pressure, and counter-clockwise to reduce it. Each complete turn of the nut on the switch should equal 2.5 psi. Once this is done, replace the switch cover. All that’s left is to adjust the pressure of the tank itself using an air compressor and a tire gauge to support the new setting.

A septic system's lifespan typically ranges from 15 to 40 years, with a common average of 20 to 30 years. The longevity heavily depends on the tank's material, maintenance diligence, and usage habits. With proper care, lifespans can reach the upper end of this range.

Lifespan by Tank Material:

• Concrete: 20 to 40 years

• Plastic or Fiberglass: 30 to 40 years

• Steel: 15 to 20 years

To maximize your system's lifespan, follow these maintenance best practices:

• Regular Pumping and Inspections: Have the tank pumped every three to five years and schedule professional inspections regularly.

• Mindful Usage: Only flush human waste and toilet paper. Avoid putting items like cat litter, paper towels, cigarette butts, fats, grease, oils, or coffee grounds down your drains.

• Avoid Chemicals: Do not pour harsh chemicals into the system.

• Water Conservation: Reduce the amount of wastewater your system has to process.

• Protect the Drain Field: Avoid driving or building heavy structures over the drain field area.

Yes, a bigger well pump can increase water pressure—up to a point. If you currently have a well pump of 8 GPM, you might notice a pressure boost when you go up to 10 GPM. However, overshooting significantly (going up to 15 GPM for an 8 GPM home) can strain your well system and result in things like burst pipes that can decrease your water pressure and make for costly repairs.