Get matched with top sonic cleaning pros in Boerne, TX

You should avoid using a pressure washer on any surface or item that could be damaged by the high-pressure spray, as some materials are too delicate to withstand the force.

Key items and surfaces to avoid include:

• Electrical Components: Never pressure wash electrical systems, as water can cause short-circuits and create a safety hazard. This includes utility meters, breaker boxes, electrical outlets, generators, and HVAC or air conditioner units.

• Delicate and Fragile Materials: Fragile items can crack, shatter, or be stripped by the pressure. Avoid pressure washing windows, glass, light fixtures, shingled roofs (especially asphalt), and stucco.

• Painted, Stained, or Sealed Surfaces: Unless your goal is to strip the finish, do not pressure wash painted surfaces, stained wood (like decks), or anything with a protective seal that could be stripped away. Be especially cautious with older surfaces that may contain lead paint.

• Soft Woods and Certain Decking: Delicate surfaces like softwood, composite decking, and antique or wooden patio furniture can be etched or damaged. If you must wash wood, use a lower-powered pressure washer with a wide-angle nozzle to prevent damage.

• Living Things: Never use a pressure washer on people, pets, or plants. The force can cause serious injury and will destroy landscaping.

It is not advisable to DIY a roof cleaning job. Cleaning your roof yourself could lead to hazardous falls, scrapes, and even burns, making this a dangerous project. Additionally, using the wrong cleaning solution or cleaning method on your roof could risk damaging it. While some markets offer a DIY roof cleaning kit, these products often speed up the deterioration of your roof.

To ensure that you and your roof are protected, it’s best to leave roof cleaning to a professional with the right chemicals, tools, and equipment to complete the job safely.

Clearing snow from your roof can be a tedious and time-consuming job. Even so, it is extremely important to maintain your roof during the winter months. You can help prevent ice dams and avoid roof collapse.

As a side note, rather than shoveling your roof, you should always use a roof rake to modify the job. Otherwise, call in a professional.

Generally, snow removal from a roof should occur once over six inches of snow accumulates, especially if you notice that ice dams have formed. Without ice dams, you can let the snow accumulation hit 12 inches before removing it. However, the amount of snow that is too much for your roof also depends on the sturdiness of your roof and the compactness of the snow. If your roof needs maintenance or has structural issues, it’s best not to let the snow accumulate too much for fear of collapsing.