Get matched with top stone and gravel pros in Albany, TX

Yes, staining a brick home can increase a home’s value, assuming your pro does a good job and you keep up with maintenance tasks. Staining brick is a much better way to increase a home’s value than painting brick, as the latter can cause chipping, warping, and bubbling. Brick stain, on the other hand, gets absorbed by the surface, so it can still breathe. 

It is possible, albeit a lot slower, to break up a rock using water. You would do this by freezing and thawing the water. You could create some initial holes or cracks in the rock, then pour water into the cracks or holes and allow them to freeze (so it's best to do this in winter or in colder climates). Since water expands when it freezes, this puts pressure on the inside of the rock and causes it to crack. You could continue to pour more water in and let it freeze to continue to break up the rock.

Yes, masonry is more expensive than concrete because the labor is much more involved. With masonry, your expert will build your project from the ground up, one piece at a time, ensuring they use the proper amount of mortar or grout during construction and keeping the project level or plumb. Pouring concrete can also be labor-intensive, but it’s a bit less involved. It requires building a mold, pouring the concrete, and letting it cure. The less intensive labor makes concrete a more affordable option in most cases.

No, you shouldn’t lay bricks directly on dirt. While it might seem like a shortcut, it leads to a patio that shifts, sinks, and becomes a maintenance headache. Dirt expands, contracts, and erodes—none of which mix well with long-term stability. To build something that lasts, excavate the topsoil, compact a layer of crushed gravel, and add a coarse sand-setting bed. This layered base gives your bricks proper support, allows drainage, and helps block weeds from creeping through. Cutting corners here just means you’ll spend more time—and money—repairing your brick patio later.