Get matched with top fencing pros in Selmer, TN

While they can be closer, the maximum distance between fence posts for residential fences is 8 feet. This ensures the panels are adequately supported by the fence posts. This is usually dictated by the width of the panel, which is typically between 5 and 8 feet. While narrower panels will require more posts, they’ll be lighter and easier to work with than wider panels that are the same height.

Silt fences are very effective when installed correctly and used in proper locations. However, there are places where they don’t work as well. This includes property with a concentrated water flow, where runoff could pool or cause a flooding hazard. You’ll also want to use caution when installing in areas susceptible to landslides. Your contractor will follow state guidelines and know when an alternate solution is more effective.

Ideally, when you replace a fence post, you should also replace the concrete footing. The concrete bonds to your new post, creating a secure base. If you install a new post into old concrete, it won’t be as sturdy.

That said, it is possible. Sometimes the post will lift right out of the concrete. If not, you can use a high-lift car jack to try and lift the pole out of the footing. Put the new post into the same hole and backfill it with fast-setting concrete. Keep in mind, this won’t work well for metal posts.

Fence pickets typically face out (away from your home or the garden that you're enclosing). Both the rails and pickets sit on the outside of a fence so that anyone passing by can see the finished side. Not only does the look increase your curb appeal, but it's also the neighborly thing to do when placing a barrier between two properties, even when you're installing a privacy fence.