Get matched with top fencing pros in Crump, TN

The depth of the fence posts depends on the height of your fence. If you’re installing a 6-foot fence, then digging 2-foot-deep holes for the fence posts will help ensure a secure installation. However, if you’re installing an 8-foot fence, the posts will need to be deeper than 2 feet to support the structure properly. Also, consider how far apart the fence posts should be to provide adequate support.

Goats need at least 250 square feet of space each, but that’s if you’re also supplementing hay. Since goats are social animals, you’ll want to avoid renting only one goat, which would take a long time to clear your land, anyway. Instead, opt for at least two goats per 500 square feet of land. Most rental companies will only rent out goats by the acre, but check your local goat rental companies to see if they make exceptions.

Do you need a permit to build a fence if you are simply replacing an existing fence? Whether you need a permit in this case depends on your local laws and regulations. Most municipalities consider a fence replacement project as being equal to building a new fence, so you likely will need a permit. Check with your local building inspection department or zoning department to see if you need a permit. If you hire a local fence contractor, this pro can take care of obtaining all permits for you.

Fabricating an aluminum fence costs about $4,350 on average, ranging from about $2,450 to $6,500. Your fencing costs can run as low as $750 or as high as $11,000 or more, depending on the fence's size, complexity, and geographic location. You should consider additional cost factors including the thickness of the aluminum, height of the fence, necessary permits, and custom colors.