Get matched with top countertop and backsplash pros in Oneida, TN

The resin should be periodically sealed to help prevent it from wearing down or becoming porous. Very sharp or very hot objects can damage the resin surface, and there’s no way to fully repair it if that happens, so we recommend treating the counters well.

No, you should not put a hot pan or pot directly on a quartz countertop. While quartz is generally heat-resistant, the resin binders used in its manufacturing are sensitive to extreme heat from items exceeding 150 degrees Fahrenheit. This can damage the resin, leading to discoloration, burns, or even cracking. To prevent permanent damage, always use trivets or hot pads for hot cookware.

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.

No, you shouldn’t put hot pans on solid surface countertops because they’re only heat-resistant up to 212 degrees Fahrenheit. Play it safe and use trivits to prevent damage.