Get matched with top pressure washers in Lancing, TN

If you’ve looked at power washing before and after photos, you might be wondering if this option isn’t the better cleaning solution for a wood fence. In fact, it just might be, especially if you’re struggling with issues like mold or embedded dirt. Keep in mind that the only difference between these two methods is that power washing uses hot water and pressure washing doesn’t, but sometimes such a small distinction can have a huge impact.

Yes, it is highly recommended to wash a house's exterior before painting to ensure the best results. Cleaning the surface removes dirt, dust, grime, mold, mildew, and old paint, which allows the new paint to adhere properly and results in a smoother, long-lasting finish. Failing to clean can lead to poor adhesion, peeling, and an uneven appearance. Pressure washing is an efficient method for this, but be cautious not to use excessive pressure that could damage siding or wood. For materials like vinyl or stucco, soft washing might be a better option. After washing, allow sufficient drying time, such as three to four days, before painting to prevent trapping moisture, which can cause blistering or peeling.

Depending on the amount of experience you have with power washing or pressure washing, hiring a professional is likely a better option. Using a pressure washer requires a bit of know-how to avoid damaging siding, trim, roofing shingles, and even the seals on your windows. Holding the pressure washer too close to the material you’re cleaning can cause damage to the surface. You can wash your home’s exteriors with a garden hose, but high-pressure cleaning should be done by professionals. 

You should avoid using a pressure washer on any surface or item that could be damaged by the high-pressure spray, as some materials are too delicate to withstand the force.

Key items and surfaces to avoid include:

• Electrical Components: Never pressure wash electrical systems, as water can cause short-circuits and create a safety hazard. This includes utility meters, breaker boxes, electrical outlets, generators, and HVAC or air conditioner units.

• Delicate and Fragile Materials: Fragile items can crack, shatter, or be stripped by the pressure. Avoid pressure washing windows, glass, light fixtures, shingled roofs (especially asphalt), and stucco.

• Painted, Stained, or Sealed Surfaces: Unless your goal is to strip the finish, do not pressure wash painted surfaces, stained wood (like decks), or anything with a protective seal that could be stripped away. Be especially cautious with older surfaces that may contain lead paint.

• Soft Woods and Certain Decking: Delicate surfaces like softwood, composite decking, and antique or wooden patio furniture can be etched or damaged. If you must wash wood, use a lower-powered pressure washer with a wide-angle nozzle to prevent damage.

• Living Things: Never use a pressure washer on people, pets, or plants. The force can cause serious injury and will destroy landscaping.