Top-rated fencing pros.

Get matched with top fencing pros in Halls, TN

Enter your zip and get matched with up to 5 pros

Need a pro for your fencing service project in Halls, TN?

Select your specific project to find the pro for you.

Find Fencing pros in Halls

Avatar for FlexCell Technologies
FlexCell Technologies
5.0(
6
)

Serving Halls, TN and surrounding areas

In business since 2016

Free estimates

Credit card accepted

"A++. They showed up on time, were extremely knowledgeable on the type of work I needed and covered all cords so no cords were visible. They set up my wireless network and everything is working top notch. They cleaned up any debris, were prompt, courteous and did and outstanding job. I would highly recommend."
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+6

Recommended by100%of homeowners
Avatar for Old School Construction
Old School Construction
5.0(
3
)

Serving Halls, TN and surrounding areas

In business since 2015

Free estimates

Emergency services offered

"All workers showed up on time and the work progressed on time. The weather was a factor but the job was finished in time and in a very professional manner. There was never a time when I had to worry if the job was being done the way it should be. There was a section of roofing on the back of the house that was done by an armature at best that caused a lot of wood rot. The foreman of the job showed me how it could be repaired and saved me over $1500 on the job.

I plan to use this provider in the future for work inside my home."
Additional Photos
Additional Photos
Recommended by100%of homeowners
Fencing questions, answered by experts

You can only change your neighbor's fence with their permission. A neighbor's fence is their property, and altering it without their consent could constitute trespassing or property damage, which may have legal consequences. If you have concerns or disagreements about your neighbor's fence, communicate with them openly and try to reach a mutually agreeable solution. If you believe the fence violates local zoning laws or property regulations, consult with local authorities or seek legal advice to address the issue through proper channels. 

For a chain link fence, the ideal distance between fence posts is 6 to 10 feet apart. Measure carefully to ensure even spacing, and resist the temptation to extend the distance more than 10 feet. Doing so could impact the stability of your fence.

Yes, installing wrought iron fencing will usually require a building permit, as do all types of fencing. Building permits for wrought iron fencing typically cost between $150 and $500, and the price will vary based on where you live and how much your local building department charges. You may also need to pay for a property survey if you’re installing wrought iron fencing on your property line. This type of survey can cost around $500, but it prevents issues with building on neighboring properties, which can be much more expensive in the long run.

The bottom strand should sit between 12 to 15 inches from the ground. If you have a problem with small critters, you can aim for 8 inches. Three-strand fences should be 16 to 19 inches apart, four-strand fences should be 10 to 12 inches apart, and five-strand fences should be 8 and 10 inches apart.

On most untreated wood fences, there is no need to sand before treating. You typically only need to sand if there’s an old coat of paint or stain on your fence. If you do need to sand off a previous paint or protective coating (like an old stain or sealant), use medium-grit sandpaper.

The Halls, TN homeowners’ guide to fencing services

From average costs to expert advice, get all the answers you need to get your job done.

What do you need done? We’ll find top pros.
  • 🌱 "Mow a small front yard"
  • 🛠 "Fix a leaking pipe under the sink"
  • 🏠 "Repair shingles on an asphalt roof"