Best fencing pros near Brownsville, TN

Whether you need a permit to build or install a fence depends on several factors, including your location, the fence's height, its placement in your yard, and the materials used. In many cities and highly populated areas, a permit is required, especially for fences taller than 6 feet. Conversely, rural areas may have fewer restrictions. Typically, backyard privacy fences 6 feet or shorter do not require a permit, while front yard fences often have a lower height limit, sometimes as low as 3.5 feet. There can also be exceptions for properties in mixed residential-commercial zones. It's best to check with your local building inspection or zoning department to understand the specific requirements, height restrictions, and location rules for your area. A professional fence installer can help you navigate this process and often secure the necessary permits for you, though this may extend the project timeline.

In terms of materials, chicken wire mesh will be the most inexpensive option to use when building your fence. The downside is that it’s not the most attractive garden fence option. In a similar vein, you could choose a DIY fence made out of repurposed items, like car tires, or wooden pallets, either of which would be free to collect. 

If you’re part of a homeowners association (HOA), you’ll need to speak with them regarding your fence repairs prior to starting work. Sometimes, you’ll need HOA approval to start repairs and ensure that the completed project meets their standards. In other cases, direct approval might not be required to start the project. Speaking with your HOA first will help avoid any unnecessary fines and headaches.

Removing fence posts that are set in concrete is something you can't do by hand. You will need an excavator, a strong post-puller, or a jackhammer. If you plan on recycling the concrete base, you may be able to cut the post out with a jackhammer and then set the new post in the existing base. However, it's usually better to remove both the fence post and concrete together. Due to the weight of concrete, you will need a hydraulic removal tool.