Get matched with top contractors in Beersheba Springs, TN

There are a few options if you miss a stud. You can simply patch the hole with spackle, sand it down, repaint it, and then find the stud—essentially starting over. If you don’t want to do that, you can insert one of the more robust drywall anchor options and hang your item on that, but that will only work if the drywall is in excellent condition and the anchor is rated for the weight of the item you’re hanging on it. You may be able to cover the hole with the object itself once it’s mounted, but it’s still recommended to at least fill the hole to protect insulation and prevent vermin from entering.  

There are approximately 5.33 board feet in a 2x4. You can use the board foot calculator in this article to easily find the answer. A 2x4 is 2 inches of thickness by 4 inches of width, so you need to find the length, with 8 feet being the most common. You’d use the calculator here to multiply 2 times 4 times 8, and then divide by 12, arriving at a total of 5.33 board feet. 

Yes, a bowed wall can be straightened in several ways. If the bowing is minimal, it can often be straightened by installing anchors or straps. For more severe basement wall bowing, your contractor might need to excavate the soil outside the foundation and pull the wall back into its original position to straighten it.

Yes, you can hammer a nail into a wall stud. But before you do, it’s important to confirm that you’re actually nailing into a stud—and not wiring, pipes, or ductwork. To check, find a few more studs in the wall, then measure to make sure they’re either 16 or 24 inches apart.